Houzz is the new way to design your home.
6,128 45” x 36” Home Design Photos
This art is called "branch out" and it's available at Havertys furniture. It's 39" x 36" and $119.99 havertys.com
branches on wall from Haverty's $119 39" X 36"
Middlesex County Project Designer for Home Additions and Remodeling
DBP offers a unique, project profile analysis, budget, and design process for homeowners planning an addition or renovation. Contact us to schedule a 15-minute phone call to discuss your next project!
the gudhouse company
Hall bath and laundry
(shown) and a small alcove make up the right side. On the left (behind the camera) is the toilet, which is against the laundry room wall, and a sink in a 36" vanity. Hope this helps!
Both the bathroom and the laundry room are about 5'6" deep and 8' wide. They are separated by a 30" pocket door. The bathroom includes a 5' tub, 36" vanity, and toilet (both on opposite wall). The laundry room contains the stacked W/D and a 24" sink base. On the opposite wall is a 15" deep storage
Thank you for the question! The floor tile is a 12"x24" tile from the Yura line by Olympia. The color is Foggy. The same line of tile was used on the tub walls, but in Snow. It's a porcelin tile, but
5'6 X 8' wide room for bath and laundry room; separated by 30" pocket door. toilet and vanity are opposite the tub
rectangle (probably rectangle would look best) border around it. I don't personally like this medallion but I can find others. This is a basically a 20x20 or 36x36 sheet of tile that you buy and doesn't require any special "artistic" talent from your contractor.
Twelve Stones Designs
The cabinets are a Sherwin Williams color called White Duck. The backsplash is a 3x6 limestone tile called Sienna Blend.
Hello - Island dimensions are approxImately 4'x10'. Good luck with your project!
That is a 36" Thermador vent hood. All the appliances are Thermador brand. Thanks for the question!
normal depth 36" width frig (frig cabinet slightly deeper)
Ellen Happ Architect
I can tell by the base that it is an extra wide vintage drafting table - normally 42" X 36", this one appears to be 72 x 30" - 36".
Cliff Spencer Furniture Maker
We made the table. We are the cabinets makers on this job. We had the base made by our steel fabricator. The size was approx. 36" L x 36" H x 30" D.