5,188 600 CFM Home Design Photos

Smith & Vansant Architects PC
2 Reviews
Shingle style home in Hanover NH
Ideabooks9,748
Questions19
with a 600cfm interior ventilator. I am sure a local appliance dealer could find the right model for your range needs. Width and the ventilation requirements of your range are important factors to consider.
with a 600cfm interior ventilator. I am sure a local appliance dealer could find the right model for your range needs. Width and the ventilation requirements of your range are important factors to consider.
“wall lights” — farmrenovation
Erin Hurst, CKD
Clean & Classic Kitchen
Ideabooks149
Questions1
ories-600-cfm-inline-blower April 15, 2013 at 12:12pm Like
“In case we choose to go with a down draft!” — pfaffpfineries
Plesser's Appliance
5 Reviews
Kitchen Appliance Ideas
Ideabooks50
Questions0
Hood with 600 CFM Internal Blower & 2-Level Halogen Lighting. http://www.plessers.com/Vent-a-hood/eph18248ss.htm Please let us know If you need help choosing your new appliances.
Hood with 600 CFM Internal Blower & 2-Level Halogen Lighting. http://www.plessers.com/Vent-a-hood/eph18248ss.htm
“ceiling” — laurclif
Fifth Element Homes
Piano Kitchen
Ideabooks8,081
Questions8
Hood with 600 CFM Blower - Stai
hi does anyone knows the most recommended heigh between the heaters and the Zephyr 36" Roma Wall Mount Hood with 600 CFM Blower - Stainless Steel ] ZROM90B? I have it at 65 cm, and people that visit my kitchen says that apparently it is too close to the heaters of the
“Simple understated pattern” — nbaccam26
Anne Fougeron
Fougeron Architecture
Ideabooks532
Questions5
300/350-CFM recirculating range hood is an OK choice. However, if you DO need powerful ventilation as well as looks, make sure you choose a range hood in the 600-1000 CFM range. (More than 1000 CFM is often not recommended, due to negative pressure issues and make-up air requirements in many locations)
300-450 CFM neighborhood, which is then reduced by at least 30% once the charcoal filter is installed. 2.) Many models cannot be ducted to the outside - recirculating only, so you're not getting complete ventilation, AND you have to purchase carbon filters on a regular basis. 3.) They're typically overpriced
“Hood” — higgswanda
Kitchen Concepts, Inc.
11 Reviews
Classy Kitchen!
Ideabooks13,923
Questions20
and also CFM's. Starting at $600 on up. Average price is around $1,200.00 www.siriushoods.com
and also CFM's. Starting at $600 on up. Average price is around $1,200.00 www.siriushoods.com
“everything” — katerinapapantoniou
Seattle Custom Cabinets
15 Reviews
volunteer park kitchen
Ideabooks821
Questions2
least 600 cfm? Thanks so much!
on the CFM the duct pipe will range from 6 to 10 inches in diameter. You need to make sure that adjacent cabinets are at least 18 inches from top of cooktop and there is at least 30 inches of clearance to anything combustible directly above cooktop. This fan solution works because the tile surround
increase the CFM commensurately. Sometimes you will do this with a remote fan rather than integral. Remote fans can pull more air and are usually quieter. Noise is a big consideration.
“Counter top” — dbloess
Rebekah Zaveloff | KitchenLab
6 Reviews
KitchenLab
Ideabooks9,937
Questions11
blowers. 200 CFM is not going to make much of a difference, especially if you cook a lot. Average full-size (standalone) range hoods have at least 400-500 CFM, usually more. 2.) Microhoods are not designed with comfort in mind, and tend to generate noise in the 6-8 sone range, which is very uncomfortable.
“island” — dmbishoff
© 2014 Houzz Inc.
Houzz® The new way to design your home™