18,274 Coastal Drawer Hardware Home Design Photos

Glenvale Kitchens
Shaker Grey
Ideabooks215K
Questions41
Where can I obtain the hardware for these corner drawers or are they customed built. Glides, Front Joints, etc:
what size space is needed for this corner drawer cabnet?
are the drawer pulls from? They are great!!
I have built cabinets with these drawers, and the drawback is the corner cabinet has an equal amount of dead space alongside the drawers as drawers hold - you loose 50% of available space the cabinet takes up. Blum is discontinuing these drawers, as they are not very sturdy and you have a
What is the circular part of the drawers mentioned in the questions?
I like them too, any information who make this corner drawer-cabnet in South Africa
We just make the drawers and supply the hardware. We can help you design the carcass, but you will need a cabinetmaker to make it for you
“Corner drawer” — babiesbabies1
Venegas and Company
12 Reviews
Classic III Walnut Detail
Ideabooks18,039
Questions8
who makes the drawer insert for foil/wraps, etc.?
serrated wrap drawer insert. Please let me know if I can get this through your company or if I should contact Premier Custom Built. Thank you for your time and sharing
Love the wrap drawer, been searching everywhere for one. Has anyone found out where to purchase one yet? Write a comment
cabinets for my home reno now, and definitely including this feature!). It's so cool; thank you for the idea! I was planning on putting it in the 2nd drawer; do you think that will be ok?
Small sink and drawers for foil, plastic wrap, etc.
Drawer for food wrap. A food-wrap divider can simply slip inside an existing kitchen drawer. If you're designing
Foil/wrap drawer. Check with Pam re her cutting idea within their drawer.
“food wrap devider” — carilmccandless
Tervola Designs
18 Reviews
Maui Plantation Kitchen
Ideabooks3,090
Questions10
Pls share the brand of hardware
Love your cabinets!! Trying to decide if I need two or one bin pulls on my similar drawers. Wondering how wide your drawer stacks are.
The cups and pulls are from Top Knobs. The rails top and bottom have to be smaller on the smaller drawers because the drawers are only 6" high. The rails are normally 3" each, so there would be no detail without making the top and bottom smaller. This is pretty standard
bottom, doors on top. Under counter two smaller drawers
36 wide drawers bottom with split 18 top drawer
look at the use of cup hardware
drawers instead of doors for bottom cabinets
Drawers instead of cabinets on bottom
“Drawer pulls” — apottinger
De Meza + Architecture
6 Reviews
2010 Decorator Showcase
Ideabooks72,323
Questions21
unexpected color palette, state of the art light fixtures and bold modern art. The original dressing area closets, given a face lift with new finish and hardware, were the inspiration for the new custom vanity - modern in concept, but incorporating the grid detail found in the original casework.
Hi were the inside of the drawers painted after the vanity was purchased, or did it come that way. Thank you.
Where did you get the cabinet pull / hardware from? Looks great!
How do you fit the drawers under the sink with the plumbing?
Hello, we designed the drawers to wrap around the plumbing. If you look closely at the top drawer you can see the solution. Thanks for the question!
Thank you Cynthia and Platemark design. They are correct, the drawer was constructed to fit around the plumbing.
“Accents” — Jerome Bros. Inc.
Susan Brook Interiors
12 Reviews
G
Ideabooks10,431
Questions10
all the drawers as well in the doors of the cooker hood and a little bread storage pull out that is usually wasted space. My signature corner drawers this time just having 2 drawers as i wanted a 2 drawer look all around the perimeter.You will see i even made the sink doors "look" like 2 drawers. There
Hi, please let me know what the hardware is. Thank you, Mel
Drawers under the cooktop for pots and pans
Drawers for pots rather than low oven
Pull out drawers under the cooktop
Deep drawers for large cookware underneath range top.
If you have a cooktop or range top, you can use the drawers in the cabinet below for storing your cookware. Make the bottom drawer deep enough to store your pots, with the corresponding lids stored in a shallower drawer above.
“Sleek.” — cocodrie
Inspire Your Space
Wembley
Ideabooks123K
Questions17
dividers in this drawer custom or where can they be purchased?
How deep is this overall drawer and the depth of the small upper drawer
where can I find these trays or something like it? I have big abd long drawers like this one
What is an excellent US supplier of drawers and storage?
making a custom dining cabinet, want to have a couple of silverware drawer inserts made, who supplies this sort of item? tks greg in vancouver, bc
any info available on the drawer hardware for this gadget organizer?
@janicehudes - the drawers are made by Effeti in Italy. If you're located in Perth, Western Australia
Love the incorporation of lvls in this drawer.
@ladyfayej - the overall drawer dimensions are 850mm wide x 480mm deep x 360mm high. The small secret draw inside is the same depth & width but only 70mm high.
“Drawer organization” — sjsadler
Turan Designs, Inc.
12 Reviews
Teri Turan
Ideabooks3,036
Questions7
Do you know who makes the drawer pulls?
I know you said top knobs, but can you give me what "name" pulls, drawer width
Jeffrey Alexander line from Hardware Resources.
Thanks! I'm wondering if it is the TOP-M1173? Hard to tell from the picture. Here is a link and the image. http://www.simplyknobsandpulls.com/top-knobs/drawer-pulls/brushed-nickel/top-m1173/
these pulls are also available from Century Hardware in Dull Satin Nickel, Oil Rubbed Bronze, Antique Pewter and Polished Nickel
knobs and pulls. Hope that helps! Or Century Hardware
Jeffrey Alexander line from hardware resources
Kitchen pulls Jeffrey Alexander line from Hardware Resources
like the drawer pulls. Jeffrey Alexander Hardware Resources and also Century Hardware
“cabinet color, countertops” — jennom
Sawhill Kitchens
7 Reviews
Universal Ease, Bemidji, MN
Ideabooks34,224
Questions9
Do you have the information on the hardware?
Where do I find the drawer seperators for the dishes?
Can these drawer dividers be installed after construction
The photo depicts dishes stored in drawers. Are the mechanisms holding the dishes adjustable? How do they work?
I noticed the dishwasher drawer, who make those?
sits in the bottom of the drawer needs to be cut to fit your drawer, but other than that the installation is pretty easy. We used a brand called Hafele. If you are in the Minneapolis/St. Paul area we could also provide them for you. http://www.hafele.com/us/products/drawer-peg-system.asp
If you are located in Minnesota we can supply them for you, otherwise you can go to http://www.hafele.com/us/products/drawer-peg-system.asp and on the left hand side, down about 3/4 of the way is a search feature to search for a dealer in your area by zip code.
“Plate drawer, dowels” — shaheenmohammed
© 2014 Houzz Inc.
Houzz® The new way to design your home™