how were these floors finished? Will this pine wear out quickly because pine is such a soft wood? People have tried to steer me away from using it.
What are the floors made from or bought from
wood as flooring in the actual house. Should it be milled for tongue and groove, or left solid? any other suggestions. thx
What company were the floors purchased from?
Thanks for the kudos!!!! The painter and floor finisher were two different people. The common element is that the walls and floors are both reclaimed wood.
What finish did you apply to the T&G?
plank flooring with the rich colors
Mix of wood and white. L
Flooring
transoms over interior doors/floors/walls/especially brick. love everything about this picture.
refresh your floors will depend on the type of finish your wood floors have.
Floors with a natural oil-rubbed finish can be shined up with wood oil. Really old, worn floors may do well with a wax. Floors finished with polyurethane can be cleaned with a solution of white vinegar and water. Just avoid getting
Refresh old wood floors. Even if you don't want to have your wood floors refinished, there are still ways to make them look their best. What you use to refresh your floors will depend on the type of finish your wood floors have.
Floors with a natural oil-rubbed finish can be shined
Added to 2,611 ideabooks Last comment "Doors for small kid closets in upstairs bedrooms" This photo has 6 questions
Has product tags
reclaimed pine floors (?) How wide are they? Did you use a variety of widths?
May I ask your supplier?
Thank you
:)
I was curious of the type of flooring and finish?
plank pine floor, variable widths and planed to 3/4" thick, with a natural urethane finish - it comes out quite beautiful.
Hope that helps!
Hello,
It shouldn't be too difficult - the trick is to locate the framing behind the wall finish, in this case the studs behind the painted gypsum wallboard. You
Once your floors have been sanded, they need to be finished. A full discussion of the available finishes could easily fill its own ideabook, but here are a few points of conventional wisdom: An oil finish may be more durable, but you will have to cope with odors and VOCs when it is installed. The glossier
walnut floors and high gloss accents of baby grand piano white through out its 3,000 square foot layout.
type of flooring you are using as well? I really like the slightly darker color to it. What other cabinet colors would that flooring in Calgary look good with? I'm remodeling my kitchen and trying to get ideas about how it should look ( http://www.timbertown.ca ).
White caninets and dark brown wood floors
walnut flooring finished on-site with a low-sheen, high-traffic commercial clear coat. The rich, warm wood provides a perfect contrast to the white cabinetry and stainless-steel appliances. Oven: Miele 30-inch Classic series oven and microwave comboMore Kitchens of the Week:Bright Mid-Century RemodelWhimsical
the open floor plan, large windows, and bare concrete ceiling but needs more color
views. Floor to ceiling windows. Urban location.
and its flooring finish; these are about the only things happening besides some built-in millwork. The emphasis is clearly on the view through the full-height glazing.
Floor color & texture + door color + table top color
concrete floor finishing cost about $1,500. Watt and his team simply polished, stained and lacquered the concrete subfloor underneath the old kitchen's peach-colored floor tiles.