Houzz is the new way to design your home.
107,495 Handcrafted Metal Home Design Photos
Laura Manning Bendik
Goshen Ridge Model Home
I love this look! How did you manage the metal around outlet covers?
This is called corrugated metal paneling. It can be purchased at your local home improvement center or hardware store, and cut into the lengths you need. In this picture they nailed
stop sign and metal on the wall
love the metal below chair rail
Like the metal siding on the walls
love the metal wainscoting and intriguing
Wainscoting can provide a room with an entirely different presence, and when it’s finished in metal, it’s incomparable. This designer nailed corrugated metal to the wall and finished it with matching wood trim; with enough know-how, you can easily complete this as a weekend DIY
Brennan + Company Architects
the swell house
What are the acoustic attributes of this door & metal wall?
Where can I locate the metal panels, what manufacturer?
I handcraft hardware similar to this at a very affordable cost. Please feel free to visit my store. www.etsy.com/shop/ArchitecturalOpening
The wall expose metal frame work and wall finish
Plain door - what about on the wall instead? Quote: Great ideas for using corrugated metal. In terms of echoing, perforated corrugated metal can be used with a sound absorbing material
Very interesting division made of corrugated metal panel. Sliding
corrugated metal against foundation in basement for finishing look - see 2nd frame
between the waves, while the second is the overall panel height.Steel is the most popular material for new corrugated metal panels. However, some manufacturers, such as Steelogic Metal Systems, offer them in aluminum, copper and Galvalume, a zinc-aluminum alloy with an anticorrosive matte finish.
Coates Design Architects Seattle
Ellis Residence - exterior
AEP Span– Standing-Seam Metal panels (COLOR-CHAMPAGNE)
those gray "metal" panels made of?
Does the standing seam metal make sounds
Such a beautiful job! We are having our architect builder do a similar finish. The builder says as the sun hits the metal it can make
hey thanks! i appreciate that....the metal should not make noise. it does happen in rare circumstances. be sure it is not attached on all edges. (follow mfg recommendations) - it may pop if
follow (wood brick metal) not the actual architecture of the buildings.
combo of wood, metal, and brick siding. blk trime
Walls can sometimes become compartments at the edges of rooms. The roof appears to float above a projected metal-clad wall from an otherwise glassy pavilion. Similarly, a masonry wall extends and thickens to allow an inset wood bench marking the entrance.
Hill Section Home
What are the pros and cons of metal roofing?
What is the color of this metal roof? I assume they come in multiple colors.
of noise that a metal roof produces has more to do with the type of metal roof and the specifics of the installation. While it’s true that a metal roof with an airspace beneath the visible metal can reverberate and make noise (like a cymbal) when the rain is falling, not every metal roof is installed
installed that way. A lot of metal roofs are either flush to a solid deck, or coated with finish that deadens any vibration. Most roofs make some sort of noise when it rains, and in fact metal corrugated roofs (“tin roofs”) that were spanning purlins with nothing else beneath (often used as porches) were famous
Sutton Suzuki Architects
Lagoon Residence @ Belvedere
simple clean look pergola that we have been trying to design. I was wondering if it is possible to find out who fabricated it for them.(assuming it is metal) I am in California also. Thanks
Metal arbor clean lines. Add horizontal
Metal arbor with vines make a unique patio frame.
metal for less maintenance
metal overhead trellis
Metal lattice w/ flowers
metal patio...Metal Pergola...metal pegola...Metal pergola....metal frame...Metal arbor...pergola metal...Pergola - metal...metal trellis
debora carl landscape design
debora carl landscape design
I have a similar fence in the northwest. The metal is turned sideways. Yes, it will reflect heat in the summer. If you use new metal, you could wipe it down with muratic acid to take away the shine. Commonly used metal is applied. It is as wind resistant as any fence would be. No
love this fence but would like to know if the Corrugated metal is on top of a wooden fence or just on its own. I have a Wooden fence which must stay that I share with neighbors, but really want this look. So I want help in how to attach the Metal ( Or Fiberglass) to the fence. Am concerned about circulation
Steel, iron, and aluminum products may be galvanized; that is, coated with zinc to form a zinc oxide barrier to corrosion of the substrate metal. Zinc can be applied at different thicknesses for more or less protection. Thickness is reflected in the price. Care must be taken in handling to avoid
Factory-style metal doors take a no-nonsense, geometric approach to fenestration. The raw metal frames are reminiscent of Mondrian paintings.
Metal-framed doors. Factory-style metal doors take a no-nonsense, geometric approach to fenestration. The raw metal frames are reminiscent
dressing - loft feel 6. Metal-framed doors. Factory-style metal doors take a no-nonsense, geometric approach
Metal framed doors. Factory style metal doors... geometric approach.
Metal-framed doors. Factory-style metal doors take a no-nonsense
6. Metal-framed doors. Factory-style metal doors take a no-nonsense, geometric approach to fenestration. The raw metal frames are reminiscent of Mondrian paintings.
fenestration. The raw metal frames are reminiscent of Mondrian paintings.
Frederick + Frederick Architects
Quonset Hut Kitchen
Is the light fixture metal and where can I buy it?
metal in island - use barn wood
metal trimmed out for basement bar
Metal on cabinets! Link to style
from the color of the corrugated metal.
With elements that are unusual to begin with, like metallics, you can make them even more interesting by adding them in surprising places. Think about finishing your cabinetry or the perimeter of your kitchen island in metal.