Houzz is the new way to design your home.
89,480 Hood wall line Home Design Photos
CCS Woodworks Inc.
White English Country Kitchen
42" Stainless Steel Range Hood wit
The website given for this Hood does not show an undercabinet hood. Please help. Thanks.
Would you please share with me the manufacture of the stove hood?
Cabinet heights flanking the hood? How high are these ceilings?
love the range hood. I would like to know how to get stainless steel shelf to instal for my viking hood, i have no cabinets on wall to connect it to, can you help me hood is 36inches
BROAN 42" Stainless Steel Range Hood Here is a link: http://www.bestrangehoods.com/store/products/productdetail.aspx?id=321936de-5869-4f4f-a2ca-eefe822720d8
The wall tile looks like Carrara marble subway tiles.
Similar to my existing kitchen, with a vent hood mounted to the wall. I like the finishing touches with the trim pieces on either side of the range.
Clawson Architects, LLC
Beautiful! So the range is 30" and the hood is 36" ? I love the look of the larger hood.
What paint color are the walls and doors and trim? Very pretty
what brand and model is the range hood?
how wide is the hood- is it 36"? what is the countertop material? love the whole look!
the hood is a "Best K260A"
Hspokrywka-- Thank you so much. I unforturnately can not take credit for the paint color on the walls of this job. I can however give you some advic on how to select the perfect color for your home. Take a look at this blog. http://clawsonarchitects
adjacent to it all in line. sort of what I had in mind for ours.
sink and range on same wall
sink and stove on same wall, counter on open wall
bracket under cabinet with range hood
Claudia Martin, ASID
to range hoods? I don't like how noticeable they have to be.
Love to know who manufactures this hood?
Love the tile and chimney hood.
Did you tile behind the chimney hood?
Who manufactures this range hood? I love the simplicity of it.
i spent hours comparing vent hoods of this style and found the WINDSTER RA-77B36SS was the best quality/value. i have it in a box in my front hall now and hope to see it in action within the week.
Have you looked into downdraft range hoods? The vent us right in the center
Take a look at Zephyr Range Hoods, they have a lot of very clean modern styles! I'm using one for my kitchen.
going up on both sides of hood vent?
Range hood with tile all the way
chimney-style hood fan over the stove
This is the way i want our hood "wing walls" to finish out
butcher block and a cool range hood!
Range hood design, maybe more intricate but would be cool if same shape as archways
idea for hood - not my favorite
size of hood vs stove
hood cabinet...Vent hood...range hood...hood cover...vent a hood...hood- maybe...Integrated hood...Hood and light...custom hood...Hood fan...Kitchen vent hood...Tudor arch in hood...Cabinetry vent hood...Vent hood dies...Range hood lighting...Shape of hood...oversized hood vent...Range Hood Cover...range hood
Peter Zimmerman Architects
New House - Southport, CT
like the Vent A Hood I just ordered. Gorgeous! Stainless with mirrored banding.
what is on the wall behind the range?
I see that some of the La Canache ranges have hoods some don't?
Have you noticed a different in the oven size as compared to a standard 30" wall oven? Trying
where was the hood purchased from?
Where is the hood from? Would it work on an 8' ceiling?
How high is the hood from the stove top
You have a beautiful kitchen. Love the hood. We are renovating our kitchen and we like ventahood. Our range is 48". Not sure what is the best hieght to have the hood from the stove top that will service both functional
functional and aesthetic. Would love to know the distance your hood is from the stove top. Thanks
Antique Building Materials, Inc.
Fletcher Horn @ ABMWOOD.COM ... Antique Materials
Is the range hood prefabricated. If so, would you share manufacturer? Is it brushed stainless? Thank you.
I love your design! I am considering using this style hood from Modernaire for my client's kitchen. I would love to know if the hood in this project photo I ventilated through the roof? Or how? Also at what height from the floor is this hood mounted? Thanks so much!
How wide is the rustic wood trim on bottom edge of the hood?
Where did you get the corbels from that's on the hood?
What materials are hood made of?
I love your kitchen hood! What material was used for it?
This is a custom range hood. We can build any hood according to your specifications, typically much less than mass-produced units of other groups
Linda McDougald Design | Postcard from Paris Home
THE HOOD!!! OMG -what are the dimensions of the range hood, and how tall is the ceiling?
I was wondering who makes this vent hood or what are the materials used for it? I love it and this whole room!!!
I love the blackened steel hood. It looks like French country with a modern edge, and the sooty, moody color is wonderful. It's so pretty, it hurts! Please tell me all the dimensions of the hood and the height of the ceiling. Thank you.
Can you provide information on the materials used on the range hood? Is it all metal or a faux finish with metal straps? It is beautiful and nicely compliments this space. Very
Eider White SW7014 and the walls are Sherwin Williams Anew Gray SW7030
I have bought two of the firebacks from Antique-fireback. They are more beautiful then they look on lines. Charles is very helpful. I highly recommend them.
Sullivan Building & Design Group
I love the hood. Where can I get one, how much$$$
Is this a hood with a recirculation kit & filter, rather than a duct to outside?
other kitchen hood manufacturers. The motor is a "remote" unit mounted on the roof. It is not necessary to have a "remote" fan. These units are made with integral fan motors also which are installed in custom cabinetry and simply vented out the side wall or roof.
If there is a hood in your kitchen now that vents to The outside then it's no problem. If your current exhaust fan blows back into the room then you have a problem. If your kitchen is just by chance on an outside wall then this will work. Good luck
This is a custom hood with an insert and remote blower mounted on roof. Any good carpenter could build this. It is a wood frame around the insert hood and tongue and groove vertical boards with an old beam used to trim the bottom. Crown
Renovating in Ashburn? Contact a local pro