Houzz is the new way to design your home.
256,356 MARFL-6-2 Home Design Photos
Did you mean: marfil 6 2
Michael Tauber Architecture
Floating mirror at vanity
counter was mounted at 2'-9". Withe faucet, Similarly, check the manufacturers cut sheets for the dimensions of the faucet set. They may have a recommendation for height above the sink. In this case we mounted it 9" above the countertop to centerline of the spout at the wall (6" above the lip of the
standard undermount/drop in sink (2'-10" if ADA) subtract the height of the vessel sink from the 3' dimension. Good luck, Michael
There are the LED strip lights that warp around the mirror/medicine cabinet on four sides. The mirror was held off the wall about 6". There are a couple of recessed
the rough opening , as we semi recessed the cabinet in the stud wall behind it. The med cabinet mirror face is 2'-3 1/2" wide and 3'-1 " tall. The mirror sits beyond the cabinet sides by 1-1/2" to allow for the LED light strip. Thanks for your question Michael
Mahoney Architects & Interiors
the jamb depth — how thick the wall is. If it’s a wall framed in 2-by-4 construction, which is what used to be the norm, the depth will be 4 9/16 inches. If you have a newer home, the construction is likely 2-by-6 and will be a depth of 6 9/16 inches. The jamb and frame need to be finished in the same
what to look for and what to tell manufacturers. Standard doors are 6 feet, 9 inches high, 36 inches wide and 1¾-inches thick. Taller standard doors start at 8 feet high and 36 inches or 42 inches wide, and are generally at least 2¼ inches thick. (These measurements refer to the slab, or just the moving
individual fixed or operable panel, other than those locations described in Items 5 and 6 above, that meets all of the following conditions: 7.1. Exposed area of an individual pane larger than 9 square feet (0.836 m2). 7.2. Bottom edge less than 18 inches (457 mm) above the floor. 7.3. Top edge more than
compartments where the bottom exposed edge of the glazing is less than 60 inches (1524 mm) measured vertically above any standing or walking surface. 6. Glazing, in an individual fixed or operable panel adjacent to a door where the nearest vertical edge is within a 24-inch (610 mm) arc of the door in
Depending on quantity, they are about $6 - 8 per sq.ft
Hi momofboys2, Native Trails sells a similar, very high quality tub, Aurora: http://tiny.cc/nativetrailsaurora
Kikuchi + Kankel Design Group
Kikuchi & Associates Landscape Architecture
is the post in the pergola a 4x4 or 4x6? is the beam attached to the post a 2x6? and are the beams on the roof 2x4? and the top 2x2? what is the gap spacing of the top 2x2s?
The spa paving level is only 1' higher than the pool paving level and both spa and pool waterlines are about 6" lower that their respective paving levels. We found that the 1' drop provided more than enough of a visual and sound amenity for the yard.
Jenny Baines, Jennifer Baines Interiors
suggest to be the minimum width for 2 faucets in a kids' bathroom?
Faucet looks like a Rohl A1405/44LM-2 Country Bath Low Lead Wall Mounted Bathroom Faucet with Metal Lever Handles http://www.faucetdirect.com/rohl-a1405-44lm-2-country-bath-low-lead-wall-moun
Faucet looks like a Rohl A1405/44LM-2 Country Bath Low Lead Wall Mounted Bathroom Faucet with Metal Lever Handles http://www.faucetdirect.com/rohl-a1405-44lm-2-country-bath-low-lead-wall-mounted-bathroom-faucet-with-metal-lever-handles/p1143560 The
Looks like light sea green 3x6 glass tile
color - light sea green glass tile 3x6
Moore Architects, PC
about 2'-2" above grade. On the left corner, the porch floor is about 5'-6" above grade. Thanks for your interest!
Could you please tell me if the columns are round or square and what size. (6" ) or
They are both operable and they are around 2'-0" wide by 2'-6" tall. Thank you for your interest in our work!
Buckminster Green LLC
Canada, in fact I use this photo to discuss with possible kitchen companies! I am getting quotes for over $4000 for an island countertop 200 sqft (3.5' x 6) .... Does that seem right??? Who made this counter and do they ship to Canada!!??
One square board foot is 1"x12x12. You might want to re-check your numbers. 3.5X6=21. If your countertop butcher block is 2" thick then you have only 42 sqft. I am building one for my customer (3x6) out of hickory and walnut for less than $1200. I made one out of teak 10 yrs. ago. Teak is
are 2 1/4" thick, and there are 5 across to make the width.
We are having a walnut countertop made for a 5 x 2 island in the Toronto area. Try www.exotic-woods.com/. They are based in Burlington Ontario.
Mill Valley Classic Cottage
I saw on another question that the tile is from Ann Sacks? Which style (Arden? Davenport?) is it? What's the color name? What's the size (3x6?)? Is it beveled? What color is the grout? Thanks so much!
The ceiling height was 9'-2". Hope it works for you!
Am on the road.....but I do recall that it was Ann Sacks' own line of beveled tile....3x6
It's 45" wide (over a 36" range). Attached are the dimensions showing the height. Ceilings are 9'-2". Best!
My kitchen designer told me this wouldn't be a problem finding this glass, well that's not the case!! My kitchen install should start in 2 weeks and we are having no luck. Can you please give me a name or number who you use??