643 Solid (1-Piece) Brushed Nickel Drawer & Home Design Photos

original Tudor kitchen, remodeledKatie Hastings Design LLC
Also is it available in polished nickel?
Top Knobs M1300 Brushed Satin Nickel Pulls Dakota Collection 2-9/16. The knobs are Top Knobs M281 Mushroom Knob 1 1/4" Brushed Satin Nickel Somerset II
Collection 2-9/16. The knobs are Top Knobs M281 Mushroom Knob 1 1/4" Brushed Satin Nickel Somerset II Collection
The faucet is the Hansgrohe Talis S HighArc 2-spray faucet in Steel Optik finish, which is brushed like a brushed nickel but just a
door fronts and side rails of the drawer fronts. We used a smaller piece on the drawer top and bottom rails (maybe 1.75" or 2"?) to accommodate the cup
Top Knobs M1300 Brushed Satin Nickel Pulls Dakota Collection 2-9/16. The knobs are Top Knobs M281 Mushroom Knob 1 1/4" Brushed Satin Nickel Somerset II Collection
Ranch RemodelJCA ARCHITECTS
the faucet since lights are polish nickel wonder chrome
I am wondering if a chrome faucet work with polish nickel sconce lights?
Can you tell me the dimensions of the drawers under the counters? Are they all the same height
What size are the cabinet knobs? 1 or bigger?
What edge detail is shown on the slab drawer fronts? Do have a detail?
1-1/4" knobs. In my opinion, the 1" knobs look a bit small unless it is a small door or drawer.
side are approx. 1'-4" wide.The vanity/sink portion of the base cabinet is 22 deep". It steps back slightly at each side where the drawers are to 19.5" deep
Diana Bier Interiors, LLCDiana Bier Interiors, LLC
painted vanities, calacatta marble basketweave floor by Waterworks, polished nickel fittings, recessed panel woodworking, leaded glass window, white subway
forth if biscuit or white would be best.. alos i was planning on using brushed nickel faucets by Brizo- RSVP do u think that would look good?
I am leaning towards Polished Nickel on my bathroom cabinets/faucets and antique nickel for the kitchen cabinets. What do you recommend
contractor said he could recess them 2 to 2 1/2 inches, but we will need to find a way to finish the 2 to 2 1/2 inches out of the wall. Was this your situation
own. I love the backsplash - how high is it? I also read how you took the 1x2s from the basketweave - that's a great idea. I have a similar scenario -
Is the cabinet hardware nickel or chrome and brushed or polished?
my cabinets (I'm not very tall) and will be reducing my light valance to 1" - istha the sizse of yours?
No more knife drawers at child-level. Please!
I'd go with the brushed look as it ties in with the stainless appliances
Does the knife drawer have a lock mechanism to keep little ones out since it is so low?
i just installed a KitchenAid warming drawer that also has a slow cooker function. So, I'm hoping to use this in place
top slow cooker that I often use. That would bring the use of the warming drawer up to a few times a month !!!
Where can find this type of drawer ?...Knife block drawer for Kitchen 10-10-14
Master Bath RetreatKayron Brewer, CKD, CBD / Studio K B
to order our bathroom hardware. Our shower, vanity and roman tub are brushed nickel. The counter is black, vanity cabinet, antique white with black pulls
tower cabinets are the same width as drawers
I read that the towers are 18' wide is that the width of the drawers underneath as well. thanks
bronze but loved a faucet fixtures and freestanding tub filler in polished nickel. I am now debating over whether to do travertine or marble on the floor
a bluish rubbed wood, and I have bronzed hinges ordered. My faucets are nickel, I was planning on a bronze chandelier. Your mixed metals look great but
Probably too late to chime in, but I did a brushed nickel light fixture with my Delta stainless faucet, and it looks great!
The Heglar's KitchenGreat Spaces!
is java. Would you suggest doing oil rubbed bronze or brushed nickel? My faucet is brushed nickel and the fixtures are oil rubbed bronze. Also, I know
chandelier. I'm so glad I saw this!! I never would have thought to mix brushed nickel with ORB. Thank you!!
I read the faucets are Delta in brushed nickel but I can not tell if the sink is white or stainless ;...style would
Love this kitchen! I know the hardware is brushed nickle and kitchen light fixtures are ORB. Just curious what finish are
We used a contemporary Brushed Nickel faucet from Delta. There is a link to Delta on my website! They have
Hi Ed, This hardwood floor is 3 1/2 solid White Oak. It came with the house and we refinished it in a warm Chestnut
KitchenDresser Homes
with a 48" cabinet that is divided where the top 1/4 section is glass and the bottom portion looks as a solid raised panel door giving the illusion of 2 stacked
hardware be similar to stove? Or can one use polished hardware style with a "brushed'style" ss stove?
What color is the cabinets? Solid or glazed?
What size spacers did you use for the tile / grout lines? 1/16"?
are more of a brushed finish. Most people just to everything in satin nickel to make it easier, but I love the look of a polished nickel faucet, especially
@188sa: It was a border piece about 1/2" thick. It might be called a "pencil" mold. I'm not positive. As
finish is satin nickel. Yes, I think you can mix the finishes within the kitchen. For example, the faucet shown here is polished nickel but the pendant
21st Century BungalowShane D. Inman
matte, except for my accent tile in the shower which has 1/2 glossy, 1/2 matte. The glossy pieces are a mini subway tile in the same color that I plan to
What size are the knobs on the vanity...1" or 1 1/4"?
Kitchen + Bathroom trends article. I like how you put drawers under the vanity cabinet drawers. That's genius! I was wondering if I could feature this
vanities and floor tile selected -- the only missing piece is the countertops -- and it's a big piece!
my bathroom. Would it work ok with 1 sink.
I love the drawer storage under the cabinets. Nice job
Love the drawers underneath the doors! I'd like to know what the height are also. Thank you
hight. I was really wanting it to fit in my bathroom my ceiling is only 94' 1/2 tall? Do you think it would fit?
Needham KitchenVenegas and Company
How big are these knobs? Are they 1" or 1 1/4". Thanks
what is material for drawer face??thanks
what is material for drawer face? thanks
Can you tell me what brand and size the knobs are for the cabinets/drawers? Thanks!
These are 1-1/4"! Each job is slightly different and the size depends greatly on the height of your doors and drawers - good luck!
These particular knobs are polished chrome and are 1-1/4" in diameter! 1" to 1-1/4" is pretty typical for us - good luck!
The island is of solid Maple with solid custom paint, predominantly black.
this helps! And the marble is a little more than 3cm; it measures about 1-1/4"!
Classical KitchenPickell Architecture
polished nickel or satin nickel finish on light fixtures?
Love the hudson valley light fixtures! Are these the polished nickel or satin nickel finish
my kitchen. You mentioned the knobs are "Aubrey" from RH- is the size 1 1/4 or 1 inch? There are several options the offer. Also, the "Bistro" pulls-
is the shelf (satin nickel?) and where can I buy it?
would love to know where I can get this shelf - and if it is satin nickel or stainless.
the 4inch pulls (vs. 3 or 6)? I also noticed that the hardware is satin nickel but it appears your faucets are chrome and the pendants are also shiny-
also a more durable finish vs. brushed/satin nickel. (Note: the pendants are in a satin nickel finish, but all satin/brushed finishes are a little different
Do you have a source or name for the drawer pulls?
Arm instead of Classical), Brushed Nickel Finish, (1) 150watt bulb, Shade is #A161 (English Bell Shade in Opal Satine, 2 1/4" fitter), Sourced from the
These are Brass Light Gallery pendants in Brushed Nickel model #VP-103-03M-BN.
Pendants (Brass Light Gallery brushed nickel #VP-103-03M-BN)
need as many cabinets because of pantry and island. Lower will be all drawers.
Kitchen TransformationSmith & Vansant Architects PC
you use a combination of glass and brushed metal on the hut
hutch hardware- is it a combo of glass and brushed metal?
IVORY AND MY KITCHEN ISLAND IS LIGHT BROWN. BUT MY FRIDGE AND MY OVEN ARE NICKEL COLOR AND I AM CONFUSED WITH THE KNOBS COLOR I HAVE TO CHOOSE AS I WOULD
half inch for the backsplash, so 3/4" versus 1 1/4" for the counter.
Is the backsplash made of solid slabs of marble or is it marble tile?
Marvin Wood Casement window (WCM2848) with a frame size of 2' - 4 1/2" wide x 4' - 0 1/8" high. Hope that helps!
brass knobs and pulls with the towel bar being a mix of glass and satin nickel.
No, it is all glass knob pulls on the hutch. The drawer pulls on the lower portion of the hutch do have a painted screw in the center
© 2014 Houzz Inc. Houzz® The new way to design your home™