Houzz is the new way to design your home.
2,377 Wall mount hood liner Home Design Photos
Julie Williams Design
Kitchens by Julie Williams Design
hits the wall being so close to it.
Could you tell me if this hood has door panels that open on them.
Is that a Crystal Hood, and if so, which one and how wide?
is the hood? How wide? and how deep are cabinets alongside?
Love this kitchen. How high is the hood above the cooktop?
is the wall the range and refrigerators are on? Waht is the size of island?
Is the cabinet colour the same as the walls.
The hood is purely decorative and is basically one big panel. There are no doors or panels that open.
You pick such pretty hoods. Any good recommendations from Crystal for a 42"? I don't want a larger than life hood! Thank you if it works!
The hood is 24" deep and 54" wide. The cabinets alongside the hood are 12" deep.
is the hood Who makes it?
Love the hood- Can you make a suggestion for mine?
Our cabinet maker has drawn up plans for the hood and i really dont like them. Iwondered if you could suggest how to ask for the same as yours (Timeless Traditional) for our 30" stove so it looks a little grander. I
i've been told that it is virtually impossible to do this type of hood with a 8' ceiling. is this true? thx
get this hood in an 8 ft ceiling? Thx so much
for the hood and over fridge and 8'bar area. Please help me with some suggestions. I have the drawings that have been scanned if you are willing to comment on them. Thanks
custom hood that is approximately 5'-6" wide.
The distance from the range to hood is approx. 3'-0" in this kitchen. Please check with your manufacturer's requirements for more information to ensure proper ventilation.
Angela Otten; WmOhs Showrooms Inc
of the hood--I like how you can still see the guests while you are cooking....is an island hood absolutely necessary or can you get away with no hood at all? thank you!
Can you please tell me what brand and how many CFM the range hood is? We have purchased the same range with charbroiler and understand we need at least 4 blower CFM. Thank you
The liner and blower installed in this custom wood hood is by Dacor. The blower is a 1600 cfm external blower (roof) plus we added an additional inline blower as a booster~ only because the path to get to the exterior was farther than normal. It has a remote switch to turn it on without straining
Stove and hood in the island
Virginia's Premier Interior Designer
Best of Houzz 2012, 2013
Best of Houzz 2012, 2013
Paula Grace Designs creates luxurious, comfortable homes emphasizing personalized design and high-end and custom furnishings. A design you love delivered with the service and quality you deserve.
Knight Construction Design | Chanhassen, Minnesota
cooktop hood should sit 24" above the cooktop, yet everywhere I look, the hoods seem to be 36 inches or so above the cooktop. Is there a standard for best function of the hood or not?
Who makes the wood hood and where can I buy it?
Is a picture of a kitchen with red walls
I want a pot filler like this but my contractor said I can't because of it being on an outside wall and I live in Lower NY. I don't feel that is correct, any comments?
Where can I find the range hood for this . I have been shopping at lowes and HD and the models they have all have the buttons on the front side , and wood on this cabinet seems like wood cover it.
Please tell me the wall color and trim color that you used, I can't get the tags to
Design Moe Kitchen & Bath / Heather Moe designer
type of hood is this? Where can I get this?
top and hood. Who is the manufacturer?
to the wall, with no added trim or fussiness. On the other hand, I do like the tailored, square look of a glass tile bumped out from the wall 1" or more (either on a mortar bed, a cement-board such as Hardi-backer, or even on 2 x 4's), with a straight return back to the wall using some of the same tile
to the wall (as opposed to being "floated" 3/4 to 1" out from the wall), and 3. no coordinating borders were available from Sonoma Tilemakers. (OK, I know that I said 2 reasons, but I discovered that I had 3 when I wrote them down.) If you prefer a contemporary style, then you may want to do everything
curved wall in the WC part of the bathroom. We had been looking at a stacked shell mosaic, but it seemed a bit too organic for the formal furniture lines of our Tribble “Novella” vanity. (See Attachment.) So we’re going to try the Azul, Peridot, Pearl, and Abalone color ways of the Shimmer and see
backsplash wall mount/brackets are called and where I can find them? I like how the glass isn't flush with the wall.
type of hood called? Where can I get that?
Zephyr wall-mounted fan is quiet and efficient
Hood (no head hurt) & veggie grater
Wall-Mounted FansThe stunning wall-mounted model shown here is from Zephyr. It's easy to forget that this piece of art is actually an appliance. Wall-mounted ventilation products are quiet and efficient, and they come in more than 200 RAL colors!
Linda McDougald Design | Postcard from Paris Home
THE HOOD!!! OMG -what are the dimensions of the range hood, and how tall is the ceiling?
I was wondering who makes this vent hood or what are the materials used for it? I love it and this whole room!!!
steel hood. It looks like French country with a modern edge, and the sooty, moody color is wonderful. It's so pretty, it hurts! Please tell me all the dimensions of the hood and the height of the ceiling. Thank you.
Hoods-4635.html http://www.handcraftedmetal.com/Single_Roll-Zinc-Hoods-3977.html We make custom hoods in a variety of styles. We can make them out of copper, zinc, bronze, pewter, and stainless steel. On our website you can see many other custom hoods we've made. Take a look on our hoods page: ht
Sullivan Building & Design Group
love the hood. Where can I get one, how much$$$
kitchen hood manufacturers. The motor is a "remote" unit mounted on the roof. It is not necessary to have a "remote" fan. These units are made with integral fan motors also which are installed in custom cabinetry and simply vented out the side wall or roof.
custom hood. Actual fan built in is a Broan with remote roof blower.
This hood is mounted 33" above stovetop.
custom hood with an insert and remote blower mounted on roof. Any good carpenter could build this. It is a wood frame around the insert hood and tongue and groove vertical boards with an old beam used to trim the bottom. Crown moulding on top.
Range hood is simple and built in
The hood is not very obvious