1,758 angled addition with area for future built in Home Design Photos

Arlington Construction Management
19 Reviews
Cape Code Renovation/Addition Arlington Heights (Arlington County)
Ideabooks5
Questions0
Cape Code Renovation/Addition Arlington Heights (Arlington County)
angled addition with area for future built in
“Ceiling” — ahthompson
transFORM | The Art of Custom Storage
36 Reviews
Painted Maple Corner Office
Ideabooks260K
Questions74
I live in the Denver, CO area. My wife will be on a girls' vacation May 1st - May 6th and I would like to have a nice home/office built in our tech port area for her birthday. Currently, we have a makeshift system, but it isn't functional.
What are the dimensions of the bottom half of this built in? Thank you!
Where is the area rug from?
through them from the bathroom to the bedroom. study is in the spare bedroom which I find is a waste as I have downsized and only have three bedrooms. the area is roomy but no windows of course...not as big as this bit do able where did you get the idea for this its great
interest in transFORM's custom built-in home cabinetry. The shelves are 3/8" thick clear glass with polished edges. It's most likely the angle and the lighting that make it appear fogged or contoured. Our custom systems are installed in the Tri-State New York City Metro Areas of NY, NJ & CT. For more
“private area yet roomy” — Whitewash Lrb
Martha O'Hara Interiors
87 Reviews
Parkwood Road Residence Master Bedroom
Ideabooks270K
Questions192
This tranquil master bedroom suite includes a small seating area, beautiful views and an interior hallway to the master bathroom & closet. All furnishings in this space are available through Martha O'Hara Interiors. www.oharainteriors.com - 952.908.3150 Martha O'Hara Interiors, Interior Selections
I really love the bookcase and media area. Designer and information?
with the tv at this angle, is it hard to see from bed?
I would love to see images of the adjoining Master Bath and dressing areas if possible. WOuld love to know how you kept the "theme" going...WIll you please post additional photos? Thanks.
I'd love to know the dimensions of the sitting area. Thanks!
Where did you get the chairs in the seating area?
“paint color” — mindyhalverson
Loudon County Pool and Spa Designer
New Construction of in ground gunite pools, renovation of existing pools, full retail store, and service on all types of swimming pools.
Sponsored
David Vandervort Architects
5 Reviews
Lopez Island Residence
Ideabooks4,474
Questions6
Where might I find the area rug in the sofa area? Thank you.
sectional on an angle, breaking up the long straight lines of the room.
the dropped ceiling section over the dining area....hung by rods from the true ceiling
What if I built a half wall like this?
Nice ceiling addition rich and warm
Try putting your sofa at an angle to divide spaces and create a walkway between them. Balance the seating with an additional chair and ground the arrangement with a showy area rug.
4. Put some furniture on an angle. To reduce the feeling of tunnel vision, try an arrangement with some of your furniture on an angle. By most people's standards, this isn't a terribly narrow room. But it is much longer than it is wide, so it could easily get that bowling-alley look with the wrong furniture
“dark window trim, light floor, white baseboard” — mcad
Kipnis Architecture + Planning
20 Reviews
Breakfast Nook
Ideabooks17,196
Questions10
what is the angle and height of the back rest?
Can you tell me who built this custom boot/ bench?
The angle is 7º for the backrest and the height is 22". The seat is set at 18" to the top of the cushion, which we assumed was 2" thick.
I absolutely love this built in!!! I am in need of an L-shaped bench but this is so beautiful! Are there plans available for this bench that we could make a few custom changes
A good idea for a built in eating area in the kitchen.
style? clean lines, angle of back
This built-in banquette provides seating for 4 in a tight kitchen nook.
“Banquett” — Jeannette Thompson
Traditional Family Room
Ideabooks2,291
Questions4
angles...any thoughts on how to do it?
90-degree corners, 22 ½-degree clips and 30-degree clips. The highlighted area in each one is the full typical perfect angle input number to put in your saw (where the angle of the wall is a true 90 or 45 or 30. Each section is broken down into different settings at ¼ degree increments and the list goes
place it on the square and adjust it so it aligns with the markings and then read the angle with the protractor. At this point I have the permanent and true angle of the crown. M = Miter angle of saw B = Bevel angle of saw T-1 = Inverse tangent. Read your calculator's instructions to figure out how
frequently two key presses in a row - inverse and then tangent or function2 and then tangent. W = Wall angle. This is what the protractor says divided by 2. C = Crown angle. This is the angle it sits off the wall. Generally it will be between 36 and 57 degrees. M = (TAN-1(TAN*W)(SIN*C)) B =
“Fire” — lunkefer
CULTivation D.S
4 Reviews
The Projector House
Ideabooks8,212
Questions5
What color is the paint on the door on the guest area?
members will likely be required for the project. And not just for the big ones, such as a full custom-home construction. Smaller projects, such as additions and renovations, also can benefit from a pro’s expertise. Architects can usually recommend other team members, too, including engineers.
to the client’s needs. They have a broad up-to-date knowledge of these systems as well as of materials and processes for a wide variety of project areas.Now, I sympathise with the awful feelings associated with a project’s going over budget. I’ve been there; I’ve gotten that dreaded call from the contractor
“Separate” — Jess Babcock
Designline
5 Reviews
Remodeled Family Room
Ideabooks6,334
Questions8
Interested in only the built in beside my fireplace. Appx cost?
Just had the custom built in done and love it! If I did the Springfield tan as they have on built in and trim, can I still do doors in room and door trim in
Nice! What dimensions is the angled wall unit/tv? Tv size? Tks!
The angled wall is 60" which accommodates a TV that is approx. 54". Not only was the design of the cabinetry driven by the selection of the TV and the other electronics, we had the equipment on site prior to construction so that the cabinetmaker could be certain of a perfect fit. In addition, the inside
the right of the fireplace. A single window with drapery panels fills up the wall which is approx. 4' wide. A chair, angled into the room, completes the corner and relates to the angled wall with the TV.
“just to get a feel for diff looks” — julianneryan
© 2014 Houzz Inc.
Houzz® The new way to design your home™