Houzz is the new way to design your home.
8,193 bent plywood Home Design Photos
Family Room with a View
Eames® Molded Plywood Lounge Chair in Colors
Did you darken the plywood edges to reinforce the reveals?
plywood birch lacquered panels with 1/4" reveal
Chair in Colors with Wood” “Hi! The ceiling is a clear lacquered birch plywood, as are the walls, with a 1/4" reveal. Hope this helps!” “wood flooring”
This is white stained birch plywood
clear finish plywood...fir plywood...stained plywood...lovely plywood interior...interior plywood siding idea?...Plywood panelling...plywood walls...plywood walls with seams
Siemasko + Verbridge
you wrap the inter part of the archway, does the wood have to be shaped or bent into the area in which it it will fit? Thank you in advance for your answer
your question! The inter arch is just bent plywood. The outside trim pieces are cut to a curve and are not bent.
William T Baker
William T Baker Houses
Its about 6 feet wide and 12 feet long. The edging is bent 1/4 inch plywood.
Its about 6 feet wide and 12 feet long. The edging is bent 1/4 inch plywood. Indoor putting
Albert, Righter & Tittmann Architects, Inc.
volume was bent to respond to the contours of the site and to begin to suggest an outdoor space on the water side. Keeping the gable roof un-bent while putting
home. The porch floor is currently covered in exterior carpeting over a plywood base. The flooring has held up will for 23 years, but now needs to be replaced
Agency), protections for all the doors and windows —such as shutters or plywood panels — could be installed when storms hit. Even if you are living lightly
it one step further and now it is the ‘bent and sliced house’. The bend is from the original design (a.k.a.The Bent House), and is a gesture to the curved
This is take two on ‘The Bent House’, which was canceled after a design board did not approve the modern style in a conservative neighbrohood. So we decided
The aptly named Bent/Sliced House implies an alteration to a long, linear plan. In its eventual incarnation, the kink in the plan goes towards shaping
La Bent/Sliced House est une nouvelle interprétation du plan longitudinal. Dans cette
A.GRUPPO Architects - Dallas
polyurethane plywood to help keep cost down.
The flooring on the second floor is polyurethane plywood to help keep cost down. Reeves says the sheets came out to about $1 per
light stain plywood floor...plywood floor...plywood floors...plywood floor...plywood floors...Exposed Plywood Floors
Smith & Vansant Architects PC
These are Maple plywood panels with a veneer tape at the edges and joints.
floor plywood contrast...plywood wall finish. very cool...Joint de plywood avec fond...plywood, floor, beadboard ceiling...Stained plywood...Plywood and feel