21,722 coat Home Design Photos

The Furniture Guild
These can be coated to resist water, it depends on how much shine you are willing to have. Epoxy works great but can be glossy. I would guess from this picture that this vanity just has a couple of coats of varnish, meaning it can probably manage fine as long
“Sink?” — klonghurst1
DSA Architects
Southwestern Condo
hence the very light color. These floors had weathered quite a bit and we have very recently had them redone with a clear non-glossy finish - three coats I believe. Here is a picture of the floors now taken from the other side of the kitchen. You will see that the color is now more what people would associate
associate with a Hickory floor. Basically, what I am trying to say is that this original color was achieved by not placing a protective coat on the floor as the original owner had wanted a "weathered" look.
“kitchen idea” — Pam Codario
Ayelet Designs
23 Reviews
Formal Entry
Heather that looks exactly like Creme - Sherwin Williams Use 2 coats...
“Like the front doors” — lionelnowotny
Smith & Vansant Architects PC
2 Reviews
Derby Hill Farm Lyme NH
All of the coats were brushed.
colors are a custom tinted plaster which is somewhat similar to Benjamin Moore's 957 - papaya. The Cabinet in the far right of this photo is base coated with Benjamin Moore's 035 - baked clay and then finished with a custom rub-off distressed finish. Hope that helps.
“use a farm sink to help break up the run” — karenlynch64
David Howell Design
1 Review
Laight Street Loft
intumescent primer/paint (and that they are costly) but i am looking for actual product names/manufacturers. also, i'm on the hunt for an intumescent clear coat (varnish or otherwise) that gives a 1 hour burn time but have not yet been able to locate one -- any ideas?
joist coating
“Like the flr” — dfluxxx
Geoffrey Butler Architecture & Planning
1 Review
Modern Green Home, Mill Valley, CA
me whether they were treated? hd galvanized? if you didnt hd galvanize, how are you protecting against possible rusting? were the etched? powder coated? or just raw steel? thanks for your help!
Galvanized steel. I'm not sure where you are located but California Metal Spray in Santa Rosa has a process that can spray a zink coating on steel that looks allot better than the typical galvanized. The posts are W4x13
“riailing” — Designs by
Hoffman Grayson Architects LLP
7 Reviews
My Own House
blend: Old Masters stain, one quart Dark mahogany with ¾" of Spanish Oak from a half pint can. Then three coats of McCloskey Man-o-War Spar Varnish, satin, rubbing with fine steel wool after second coat. The blue trim paint is Benjamin Moore Aura Exterior Low Luster Nantucket Green, (which is actually blue
“Brown and blue trim house” — jmedaille
Lindgren Landscape
6 Reviews
Fossil Lake Estate
This structure was installed several years ago and has not grayed. We like using a clear coat as to not hide the beauty of the wood, and graying has not been a problem.
With a clear coat does it gray over time or since it's somewhat sheltered from the elements will it remain warm?
“ceiling” — autumn1122
© 2014 Houzz Inc.
Houzz® The new way to design your home™