20,933 cubist range hood Home Design Photos

Historical Concepts
4 Reviews
Barn Retreat
Ideabooks3,388
Questions8
What kind of drum is the hood vent made out of
Adairsville, GA 30103 (404) 252-3244 If, however, you are referring to the vent hood, it was custom crafted by the contractor.
the dogtrot side dictated that the range be placed in the island, and the clients' range required a commercial vent hood.Frustrated with the choices available
had some metalworkers custom fabricate the drum with a standard commercial range insert. When asked about the finish, the owners rather liked the discoloration
Where did you get the hood?
“Cool hood” — sigridcresh
Loudoun County Custom Builder - Best of Houzz 2014
Bensonwood's mission for over 40 years has been crafting beautiful and healthy, high-performance home sanctuaries capable of enduring for centuries.
Sponsored
Knight Associates
Interpretation of a 19th Century Farm House
Ideabooks3,754
Questions12
what is the distance between bottom of range hood and range surface ?
Is the hood 18" or 10" tall?? Under cabinet model?
Vent-A-Hood and they recommend 30" between the cooktop and the bottom of the hood. Each manufacturer of hoods will have a recommended height range listed
shelf accessory that is made by the hood manufacturer. ... The lower piece of stainless steel is part of the range.
as well. Your local Vent-A-Hood dealer can show you all the options.
Could you tell me what the model number of the hood is and if it also has the warming
clients seem to prefer the Vent-A-Hood over the Wolf and our local appliance showroom recommends it as well. The Vent-A-Hood is easier to clean than the Wolf
“Flat doors” — christinehuszarik
Solaris Inc.
1 Review
Ideabooks12,588
Questions12
Dacor make over appliance too? And if so what's the price range for them? Thanks!!
Like the cabinet hood. Would be similar to our layout
Oven hood...Range hood...vent hood...Hood fan stove...Hood with arch...Hood shape...Hood fan...Hood and marble...simple range hood...stove and hood...range top and drawers...range top...stove hood
“Countertop” — kmralls
Venegas and Company
13 Reviews
Barrington RI Kitchen
Ideabooks17,952
Questions15
Do you know what the bottom of the hood height is from the range??? Thank u!
Range Hood -- what is the brand/model of the range hood
How wide is the range hood cabinet? I love it! Is it okay to have a 36" cabinet over a 36" cooktop
Are both drawers under the range top full height and depth or did they have to be modified to fit the gas/electric for the range top?
planning on stained knotty alder cabinets--this design--painting the hood ok?
If you plan to finish the hood in an alternate color, I advise floating the hood. This way the hood is an independent statement from the cabinets
The hood insert is Best By Broan, PIK33. The cabinet surround was designed by us and built to accept the hood insert. Hope this helps
“backsplash tile” — Kim Sykes
Katie Johnson
Katie Johnson Interior design
Ideabooks3,186
Questions8
Is it typical to have the range hood not go all the way up the ceiling? Does it just recirculate air?
Hello. Can you tell me the brand of this range hood? It looks like it might be the Zephyr Anzio
Can you tell me who makes the range. Thanks
in our store. Is this what you are looking for? 30" Wall Range Hood ... 36" Wall Range Hood ...
Since this is a wall-mount hood, it's possible that the duct is angled 90 degrees and goes into the wall
blower & duct - there's no technical reason to run it up to the ceiling. The hood is on an outside wall, so making a 90-degree angle would produce the shortest
the best in terms of performance - A+ to the kitchen builder/designer! The hood looks like the Futuro Futuro "Rainbow" wall-mount model: ...
“Cabinets” — elenispeaker
TZS Design
12 Reviews
Elegantly Detailed Kitchen
Ideabooks6,199
Questions15
standard cabinet size restrictions. One of our specialties is one of a kind hoods. We produce all construction documents and specifications necessary so your
finding corbels tall enough for my new hood, which will be at least 30" above the range. Thanks!
Love the hood, but I'm only going to have a 36 inch cook top. What size is shown here ?
the manufacturer of the corbels for the hood?
Would you please tell me who the manufacturer is of the hood corbels? I am having a hard time finding
designed hood by TZS Design is constructed around a 36" wide Vent-a-hood brand exhaust hood.
Beautiful! What are the dimensions of the hood?
the manufacturer specifications of the range. They are within an acceptable distance from the edge of the range.
tile used on either side of the range?
“Love it” — 0420skunk
Carolina Kitchens of Charleston, Inc.
Elegant Traditional Kitchen Beaded Inset
Ideabooks5,077
Questions16
the range and the island ?? Also the colors of the island as well as the counter top material?? It's a stunning space!
This hood is perfect for a job out here in CA. Can you give me the resource for this custom piece
piece. It is in our "Sierra" hood collection: ...
We actually made this particular piece Phillip. It is in our "Sierra" hood collection: ...
Handcrafted Metal makes a custom copper hood essentially identical to this one. Our hood #5152 has pot rails and a crown. We can build it without
I like the copper hood, cabinetry and hardware
I LOVE the copper hood. Where
“copper range hood” — Batul Valika
Fivecat Studio | Architecture
3 Reviews
Pelham Shingle Style for a Modern Family
Ideabooks8,296
Questions14
Does your vent hood come out past the counter?
I like this but kind of like the the "shaped" hood better
Vent hood depth...hood surround...range hood...hood vent...Vent Hood idea...Range Hood Option...kitchen hood...range hood moulding...stove hood...Hood design
“Built in range hood” — jpellegrini01
© 2014 Houzz Inc. Houzz® The new way to design your home™