Really like the floor. I was wondering how the wood and tile was joined.
rods1
January 10, 2013 in Photo Questions
I'm concerned about the wood expanding and contracting. We live in the adirondack mountains where the temperature and humidity fluctuates alot. Also did you have to use a special width and depth board to accomodate the tile size? I really like the design and would love to make it work in our house. Thanks in advance for your reply.
Thank you for reporting this comment. Undo
PRO
Crisp Architects
Thanks for your interest! The wood will expand and contract naturally with the humidity and changes in temp. The trick is to not grout where the tile meets the wood but use caulk instead.
1 Like   January 11, 2013 at 12:50PM
Thank you for reporting this comment. Undo
rods1
Thank you for your response.
0 Likes   January 11, 2013 at 2:14PM
Thank you for reporting this comment. Undo
mynewkitchen27
How did you get the height of the tile and wood to be level???
0 Likes   April 11, 2013 at 8:14AM
Thank you for reporting this comment. Undo
PRO
Buckner Construction Inc.
we did a floor similar to this and we installed the wood and then in-between the wood we added a tile underlayment that brought the height up so we could add thin set and then the tile to be flush.
The use of caulk is a very good idea.
3 Likes   April 11, 2013 at 9:12AM
Sign Up to comment
More Discussions
Small living room
I have a very small living room (only 3 walls) that's...
Need help for my kitchen
I have an old cherry table, medium oak chairs, cherry...
Best Eames Reproduction
As an initial note, I am only interested in a new quality...
Need Advice: Family Room Area Rug, Window Treatments?
I am in the midst of re-decorationg our family room....
Hallway ceiling fixture
My hallway ceiling height is 8 feet. What size (height)...
People viewed this after searching for:
© 2014 Houzz Inc. Houzz® The new way to design your home™