23,195 how to take cuttings Home Design Photos

Gardner Mohr Architects LLC
10 Reviews
craftsman teahouse
Ideabooks5,582
Questions7
Beautiful Wenge Countertop and cutting board. Is that a Kallista sink?
2 feet. It looks to me like there is just a foot or a tiny bit more between the table side of the counter and the faucet & sink. So, my question is how you dealt with the plumbing & garbage disposal. I understand it would be low enough to slide under the back half of the sink, but it is the plumbing
plumbing that has me stymied. I am in the middle of designing my own client's island and had come up with this very idea myself, but hadn't figured out yet how to deal with either a cooktop or sink getting in the way of it as it slides in. I would be so grateful for any. My client is more likely to have her
The island countertop and sliding cutting board are wenge. Fading is not an issue. For maintenance, it should be oiled regularly.
“Counter top de madera” — adrielledenise
DC Metro Tile, Stone & Countertops
Your One Stop shop for Granite, Marble, Quartz countertops and cabinets.
Sponsored
Martha O'Hara Interiors
88 Reviews
Parkwood Road Residence Kitchen
Ideabooks200K
Questions300
How can I find where to buy the bar stools? Are they leather? Comfortable? Thanks Marco
Hi!! Do you know how many inchs you "cut back in" for the legs to the straight part on
I was wondering what the durability is of a wood countertop is it as hard to take care of as marble? I have three kids
an existing kitchen. My cabinets are natural maple. The designer wants to add a thick crown molding in white above my existing maple cabinets to take them to the ceiling (similar to the thick crown I. This kitchen photo). The Crown would also be added around the kitchen. Will it look good to mix
the picture) and with an opening to dining room (to the right of the photo). My other question is: if we have the same layout, how big could the island be in our case and how much should we allow for clearance between counters and island? Thank you in advance - I really like your work!
“for eating.” — hsawlani
ID by Gwen
9 Reviews
Mid Century Modern Master Bathroom
Ideabooks279K
Questions77
for the border a bullnose or would the tile 12 by 24 need to be cut? I plan on using the mosaic 1.25 x 4 inch (12 inch by 12 inch sheets) inside the border. My concern with the border is it could be sharp if my contractor has to cut the tile for border. What size would you recommend on border?
why didn't you start from the tiles for the wall cutout for the toiletries? cutting just a little if the ones to the right is extremely weird.
also very nice. I like the brickets and the wall color. But how about this faucets at http://www.amazplus.com/thermostatic-chrome-wallmount-shower-faucet-060914403-00-p-252434.html ? I like it very much and want to do some changes.
how much space between the glass and the tub.. wishing to know if
“See this looks awful this colour tile” — emsnralph1
Venegas and Company
12 Reviews
Needham Kitchen
Ideabooks105K
Questions147
make an educated guess, take a look at Benjamin Moore's
how high are the ceilings in the house. Are they 9 or 10. We have 10 ft ceilings and not certain we should go that high.
How wide is the door opening by the ovens?
What kind of wood is used in the flooring, how wide are the strips and what color is the stain. Thanks.
how big should the hood be?
How much room did you leave between the island the cabinets on either side? What is minimum necessary?
stained flat cut oak. The finish was not part of our scope of work and we unfortunately do not have further information. The walls are BM "storm" - images online and photographs do not always capture the exact color. If you feel the storm is too dark for your space, you could certainly cut white in to
“Similar to ours” — nsoldriver
dSPACE Studio Ltd
5 Reviews
Master Bathroom
Ideabooks34,152
Questions39
renovation for my master suite. Bedroom bathroom and closet. I am taking down all the interior walls and starting over. I need a professional to help me with the design process so I have drawings to give to my local builder and suppliers. How would I go about getting the team who designed this space? Thank
How is the floating marble bench supported and installed?
Hello, I think the floating marble bench looks absolutely stunning. We are looking to have a floating bench installed in our (soon to be) new shower stall. Was just hoping you would be able to shed some light as to how this was
using large format tiles on our walk-in shower floor. Our tile installer has cautioned against it because it's harder to create the proper drain slope. How did you overcome this? Aesthetically, I'd rather use the same size tiles in the entire shower rather than using a mosaic size on the floor as he suggests
“White” — b24v
Avalon Interiors
6 Reviews
Port Credit Townhome
Ideabooks357K
Questions225
floor along with the sizes? I want to be able to tell someone in a tile showroom exactly what I want (which is this) and have them understand what I am taking about . You're bathroom is amazing !
controls on the far wall? And how would you turn on the shower without getting wet first?
Who is the maker and what is the name of the tile in the shower and on the floor? Who is the maker of the shower door? How much did each one cost?
How is the shower floor pan constructed?
Is it a zero clearance/no barrier entry or is there a curb? How tall is the curb?
Where did you get the metal units (shelves) in the shower? How are they attached to the tiled shower walls?
Marble Granite Depot is the supplier of the limestone floor tile which was custom cut and beveled. The wall tile is also from Saltillo Imports The glass door/enclosure was custom done by Avalon Interiors
“淋浴間 寬度 與廁所寬度一致” — kaisoon
Elad Gonen
1 Review
hall
Ideabooks3,725
Questions4
calculate the amount of light you need, take the square footage of the space and multiply by 1.5 to get total wattage (equivalent wattage) required,
Elad GonenSave to IdeabookEmail Photo Do the math. Having a hard time knowing exactly how much light you need in a space? As a
How much light do i need? Do the math. Having a hard time knowing exactly how much light you need in a space? As a rough guide, calculate the square footage of the space you’re trying to light
Oh how I love me a nice long hallway.
Do the math. Having a hard time knowing exactly how much light you need in a space? As a rough guide, calculate the square footage
is equivalent to a 60-watt incandescent. The wattage ratings measure how much electricity the bulb actually uses, not the amount of light it gives off.
“Lights and doors” — tgavin17
Crisp Architects
42 Reviews
Crisp Architects
Ideabooks98,979
Questions57
Approximately how wide is the entrance to the Family room?
How do I add my own idea book
butcher block? How are they finished?
I am trying to figure out how tall the soffit is above the cabinetry and how tall is the soffit
Is the bead board part of the cabinetry or was it a purchased material that was cut and nailed to the area over the counter tops? I have seen bead board panels at out local lumber store and was thinking this is what you used. Again
Can you tell me how high the ceilings are in this kitchen?!
To answer your question, butcher block wood counter tops are meant to be cut on and are designed to withstand frequent cutting and scratching. For maintenance, you would apply mineral oil from time to time to prevent over drying. The material is long
“wall comes down to the top of cabinets” — gosiaw13p
© 2014 Houzz Inc.
Houzz® The new way to design your home™