Create an ideabook for your next remodeling project!
Browse more than 1,500,000 photos from top designers and save your favorites
Handmade Home: Build a Simple Flower Box
Inexpensive wood, a few tools and a little handiwork can yield a fresh look for your windows
This DIY flower box adds charm and curb appeal almost instantly. And once you've got the basic steps down, you can easily customize yours by making your own brackets, adding decorative molding, angling the ends of the box, creating a curved edge or adding any other unique details that make it feel like your own.
by susan duane
»
Like it? Save it to your Ideabook »
Materials:
• 1-by-8-by-10-foot plank in #2 pine (this is what I used)
• Pair of saw horses (I used two old benches)
• Tape measure, T square and hammer
• Drill with large bit
• Nails (I used #6 penny-finish nails)
• Circular or hand saw
• Primer, paint and brushes
• Metal or wood brackets (available at home improvement stores)
• 1-by-8-by-10-foot plank in #2 pine (this is what I used)
• Pair of saw horses (I used two old benches)
• Tape measure, T square and hammer
• Drill with large bit
• Nails (I used #6 penny-finish nails)
• Circular or hand saw
• Primer, paint and brushes
• Metal or wood brackets (available at home improvement stores)
Like it? Save it to your Ideabook »
Step by Step
1. Measure your window and determine the length of your flower box. Mine was 30 inches. Measure and mark with a pencil.
This grade pine is the least expensive, but it has a few knots in the wood — with a little paint they can be camouflaged. You can always use the premium pine, but the cost for the same size plank is about three times as much.
1. Measure your window and determine the length of your flower box. Mine was 30 inches. Measure and mark with a pencil.
This grade pine is the least expensive, but it has a few knots in the wood — with a little paint they can be camouflaged. You can always use the premium pine, but the cost for the same size plank is about three times as much.
Like it? Save it to your Ideabook »
Use the square to make sure your line is straight, and mark it in pencil.
Like it? Save it to your Ideabook »
2. Saw along the line.
Your local lumber yard or Home Depot may be able to make straight cuts for you. If you have the dimensions, a pencil, tape measure and square, all you have to do is make all your markings and have someone cut the wood.
Your local lumber yard or Home Depot may be able to make straight cuts for you. If you have the dimensions, a pencil, tape measure and square, all you have to do is make all your markings and have someone cut the wood.
Like it? Save it to your Ideabook »
Use the first piece as your template for the next two. You should end up with three pieces of the desired length, one for each long side and one for the bottom.
Like it? Save it to your Ideabook »
3. Nail the sides to the bottom. It's much easier if you start the nails before putting the pieces completely together. This way, you have to hold the pieces together only while hammering them in, and you don't have to worry about holding the nail in place.
Like it? Save it to your Ideabook »
The nails I used have small heads. When they're hammered in, they aren't too noticeable.
Like it? Save it to your Ideabook »
This is what you'll have after attaching two of the boards you just cut.
Like it? Save it to your Ideabook »
Do the same thing to attach the other side.
Like it? Save it to your Ideabook »
4. With the leftover piece, measure and mark the short end pieces.
Like it? Save it to your Ideabook »
Again, use the T square to make sure the line is even. Draw your line and use the piece as a template for the other end.
Like it? Save it to your Ideabook »
5. Start your nails as you did before and nail in each end.
Like it? Save it to your Ideabook »
6. Drill drain holes. Using a ⅜-inch drill bit, drill at least three holes in the bottom of the box for excess water to drain out.
Like it? Save it to your Ideabook »
7. Add finish. If desired, prime and paint the box in the color of your choice.
Optional: If you want to make your own brackets, you'll need:
Optional: If you want to make your own brackets, you'll need:
- Additional wood
- Scroll saw
- Router
- Decorative molding
Like it? Save it to your Ideabook »
8. Line the box with clear plastic. Staple lining into place to prolong the life of the box.
Like it? Save it to your Ideabook »
9. Fill your new box with potting soil. Choose a loose soil, the same type you'd use for a pot or other planter, from any home improvement store or nursery.
by susan duane
»
Like it? Save it to your Ideabook »
10. Hang it! Here is my finished box. I did this project during the winter. Come spring it'll be filled with beautiful and bright blooms.
Tell us: Do you have a window box or a place for one? Please share a photo below.
More Handmade Home:
Revamp a Chair
Antique Castoff Emerges as Wall Art
Tell us: Do you have a window box or a place for one? Please share a photo below.
More Handmade Home:
Revamp a Chair
Antique Castoff Emerges as Wall Art
Usually a galvanized liner is made for window boxes to the shape of the planting area w/ drain tubes that extend thru the drilled holes in the wood. or..One might slow down the rot by adding a rubberized liner w/ tubes to drain out the holes.
The idea is that the liner drain tubes extend thru the holes so the drain water doesnt just seep between the liner bottm and the wood.
Another option is to buy a rectangle plastic planting container and paint it so it doesnt look so 'plasticy' and set it on nice looking brackets. I've done this to good effect.