47,723 manufacturers Home Design Photos

kitchens by peter gill
warrandyte
Ideabooks5,378
Questions7
t of this gap will vary depending on manufacturer and can be found inside your user manual or on the manufacturer’s website.
space you should leave to avoid a tight squeeze, or worse, later. All manufacturers will recommend an air clearance gap between the top of the fridge and
t of this gap will vary depending on manufacturer and can be found inside your user manual or on the manufacturer’s website.
space you should leave to avoid a tight squeeze, or worse, later. All manufacturers will recommend an air clearance gap between the top of the fridge and
“tap I want for island basin” — Gustav van Pletzen
TruexCullins Architecture + Interior Design
5 Reviews
Enivronmentally Friendly
Ideabooks2,036
Questions4
years. o Uses panels made by a manufacturer based in the U.S. That way your warranty will still protect you if the manufacturer goes belly up. o Doesn’t outsource
Uses panels made by a manufacturer based in the U.S. That way your warranty will still protect you if the manufacturer goes belly up. Doesn’t
years. •Uses panels made by a manufacturer based in the U.S. That way your warranty will still protect you if the manufacturer goes belly up. •Doesn’t outsource
years. Uses panels made by a manufacturer based in the U.S. That way your warranty will still protect you if the manufacturer goes belly up. Doesn’t outsource
years.Uses panels made by a manufacturer based in the U.S. That way your warranty will still protect you if the manufacturer goes belly up.Doesn’t outsource
“ribbon PVs” — anne1959
K+ARchitects
5 Reviews
Kitchen
Ideabooks1,632
Questions2
height will vary depending on the manufacturer. If you are in doubt, ask your appliance retailer or consult the manufacturer directly. Once you know the
The minimum height of the range hood above a gas hob is 650mm. Most manufacturers recommend a minimum height of 700-750mm.
The minimum height of the range hood above a gas hob is 650mm. Most manufacturers recommend a minimum height of 700-750mm. Always consult the user manual
height will vary depending on the manufacturer. If you are in doubt, ask your appliance retailer or consult the manufacturer directly. Once you know the minimum
The minimum height of the range hood above a gas hob is 650mm. Most manufacturers recommend a minimum height of 700-750mm.Always consult the user manual
“Kitchen skylight” — strawberryneurons
40% Off Storewide Thanksgiving Sale!
(301) 294-8193
Email Us
Valid Nov 26 - Dec 3. Restrictions Apply
Tile, Kitchen & Bath Products
Visit our Rockville Showroom
PORCELANOSA endeavors to be the industry leader by providing trendsetting cutting-edge designs of unparalleled beauty and refinement, uncompromising quality, and technologically superior products.
Sponsored
Tim Barber LTD Architecture & Interior Design
8 Reviews
Helena 2
Ideabooks2,316
Questions3
Would you please share the manufacturer of this ladder?
Could you please list the manufacturer of the library ladder system
tripping hazard when not in use. However, many are unaware that most ladder manufacturers offer mechanisms to push the ladder snugly against the wall or cabinetry
behind it, and it couldn’t work better in this narrow passageway. Alaco manufactures an upper slide-bar assembly for its ladders to achieve this vertical
tripping hazard when not in use. However, many are unaware that most ladder manufacturers offer mechanisms to push the ladder snugly against the wall or cabinetry
behind it, and it couldn’t work better in this narrow passageway. Alaco manufactures an upper slide-bar assembly for its ladders to achieve this vertical
“stripe in the flooring of this storage hall with library ladder” — Mary Herman
Contemporary Kitchen
Ideabooks2,391
Questions4
Many sink manufacturers also sell drying rack inserts, like this one. If your sink’s manufacturer doesn’t make an insert for your
drying rack insert from the container store or the sink manufacturer
Many sink manufacturers also sell drying rack inserts, like this one. The advantage of mounting
you still have room for more dirty dishes underneath. If your sink’s manufacturer doesn’t make an insert for your particular model, try the Container Store’s
Many sink manufacturers also sell drying rack inserts, like this one. The advantage of mounting a drying rack on the edges of your sink — as opposed to
you still have room for more dirty dishes underneath. If your sink’s manufacturer doesn’t make an insert for your particular model, try the Container Store’s
“fal” — kkriszta
Modern Living Room
Ideabooks2,123
Questions2
track will need to be connected to both the wall and the ceiling. Each manufacturer has distinct connection specifications that also require design attention
track will need to be connected to both the wall and the ceiling. Each manufacturer has distinct connection specifications that also require design attention
“different track systems” — kikistuddy
Maxa Design
Warragul Residence
Ideabooks338
Questions0
profiles available from each manufacturer, you should be able to find one that suits your desired aesthetic.Some manufacturers are capable of rolling steel
Choose a profileBecause each manufacturer can roll the metal in any way they see fit, there are a myriad different
ribbed cladding sheets, and deeply formed industrial profiles. Many manufacturers produce products specifically advertised as cladding which have very
profiles available from each manufacturer, you should be able to find one that suits your desired aesthetic.Some manufacturers are capable of rolling steel
Choose a profileBecause each manufacturer can roll the metal in any way they see fit, there are a myriad different profiles that can be found for wall
“Country retreat” — azzaradin
Doors For Builders Inc
69 Reviews
Wood Doors for Worthy Spaces (Custom Solid Wood Doors)
Ideabooks1,861
Questions2
If you’re going the custom route, a designer plus a manufacturer is the way to go. Many manufacturers have in-house designers on hand that can turn even
doors, and some even offer semicustomization. If you go straight to a manufacturer, like Doors for Builders, you can find competitive prices on stocked
design in solid wood and added some detailing.” Furthermore, custom door manufacturers can match stains, paint colors and windows found elsewhere on and inside
“front doors” — ireneliz
© 2014 Houzz Inc. Houzz® The new way to design your home™