487 no drilling required mounting hardware Home Design Photos

Dan Nelson, Designs Northwest Architects
12 Reviews
Winderemere LIving Room.
Ideabooks3,833
Questions6
on one end and fine thread on the other (which requires a special tool for installation). You'd drill the panels to slide over the rod then these stand
ceiling - hardware too much ?
“Interesting ceiling panels” — russellcooper
Northern Virginia Painting Professionals
We have been working in the Northern Virginia and Maryland area for over a decade and have many happy clients on both sides of the beltway.
Sponsored
Just a Girl
Just a Girl
Ideabooks55,300
Questions15
Possible step up if required to push garage toward the south side of property.
If you don't want to drill into your walls, metro shelving is a fabulous solution. While it's seen here
paint your own door black without taking it off the hinges or removing hardware. The secret is Benjamin Moore Ironclad Metal and Wood Enamel in Black 363
“coat rack in garage at door mud room entry” — scarolinahome
Glenn Gissler Design
Glenn Gissler Design
Ideabooks46,509
Questions22
there a difficulty installing the track and the curtain due to room to use drills etc? This is a beautifully put together room.
Restoration Hardware pulls these paint and fabric colors off beautifully. You will find a variety
A tall window furnished from top to tail requires a lot of fabric — and the same applies to the lining. Lightweight fabric
“Seating” — fajrrasul
thirdstone inc. [^]
2 Reviews
SD House
Ideabooks9,694
Questions6
You're welcome... Note - The holes for the counter-sunk screws would be pre-drilled. The horizontal wood pieces would have to be partially assembled as a panel
the house; provides privacy, safe backdrop for seating options, does not require built-in seating, cost effective.
Ipe. The sliding mechanism was pretty basic industrial barn-door style hardware. 1x1'1/2
“fence” — rmart040
Matarozzi Pelsinger Builders
4 Reviews
Piedmont Residence
Ideabooks4,112
Questions3
window, the thinner the rod can be. Larger and wider windows will require heftier rods.
high mount drapes for french doors and roman shades for all other windows in room?
Rod dimension. The size of of your rod and rings — if that is your hardware of choice — is yet another factor. The narrower or smaller your window, the
the thinner the rod can be. Larger and wider windows will require heftier rods.
“roll shades” — ldanaher
Murphy & Co. Design
5 Reviews
Highcroft Hunting Barn
Ideabooks42,333
Questions20
hoist for deer processing). The hoses are fed from an air compressor (mounted elsewhere). Thank you.
Rough lumber garage overhead air gun safe drill press bench
working vision. “You want to understand exactly what your personal storage requirements are, and then design your garage accordingly to fit your needs,” says
“wood color. lighting.” — joysbackporch
Rethink Design Studio
3 Reviews
Bath 2
Ideabooks12,929
Questions22
Could you tell me the manufacturer and style of the cabinet hardware?
Hello! The cabinet hardware is reproduction glass from The Paris Market, Savannah, GA. You can find
makes it prone to stains, scratches and etching from acidic substances. Requires periodic sealing to maintain the finish. Price range: $125 to $150 per
makes it prone to stains, scratches and etching from acidic substances. Requires periodic sealing to maintain the finish. Price range: $125 to $150
makes it prone to stains, scratches and etching from acidic substances.Requires periodic sealing to maintain the finish.Price range: $125 to $150 per square
knobs, under mount sink, marble counter top
What brand is the sink hardware faucet?
“Counter” — Liz Gillespie
At-Six Architecture
Wet room with a view
Ideabooks15,420
Questions14
Is that a mirrored medicine chest above the sink? Surface mount with lighting above and below? Beautiful design!
method as it sounds like the most durable way to mount a floating mirror without having visible hardware?
to a bracket mounted onto the wall with set screws at the top and bottom recesses.
hmm, im having a tough time figuring out how mount a floating mirror
anywhere near the shower's wet zone. A distance of 3' or one meter is required here in Canada but with the over spray a distance of 4.5'-5' would be safer
mirror so that there is no visible hardware coming through the face of the mirror. .. a couple of glaziers have suggested using four pegs that go through
bottom (carrying the weight of the mirror). The box is attached to a bracket mounted onto the wall with set screws at the top and bottom recesses.
“Open shower?” — gbyrnes
Renovating in Ashburn? Contact a local pro
TrueBuilt, LLC
Northern Virginia Contractor
View my projects
Architectural Ceramics Inc
Arlington Area Tile & Stone Supplier
Best of Houzz
View my projects
© 2015 Houzz Inc. Houzz® The new way to design your home™