Houzz is the new way to design your home.
478 no drilling required mounting hardware Home Design Photos
Northbrook Eclectic Transitional
any problem with mounting faucets directly over the rim of tub? thank
Who makes the hardware on the vanity?
photo might be taken at an odd angle - but the faucets are mounted in pre-drilled holes by tub manufacturer. The spout is in the perfect location - no issues. Hope this answers your question.
i think the client picked op the hardware herself from Pottery Barn
Northern Virginia Shower Glass and Mirror Designer
ABC Glass and Mirror, Inc. is a family owned and operated business with over 40 years of owner industry experience and over 150 years of combined experience.
Charlie Allen Renovations, Inc.
these particular ones are meant to disengage from the clip which is permanently mounted to the wall. If the rack itself is permanently mounted I would not advise removing them or you are probably going to have to drill new holes. If this is the case, you could replace what you have with a model that
i like the color of the cabinets and the hardware. i like the coordinating color on the window trim...
Las Canoas Remodel Bifold Doors Open
The shelves are free floating. The carpenters used long lag bolts - they cut off the heads of the bolts, inserted them into the wall, drilled holes in the 2" shelves, put epoxy in those holes and slid the boards onto the lag bolts. The shelves sit about 1/2 inch off the wall. Hope that helps
There is icynene - a spray foam insulation - behind the boards of the ceiling. It is great insulation for a home in a high fire area as it does not require venting.
This coffee table was bought at Restoration Hardware ("Dutch Industrial Small Coffee Table"). I hope that helps.
electrical wiring that was previously stored in the interior wall in a new beam running the length of the room.Armchairs, sofa, coffee table: Restoration Hardware
SchappacherWhite Architecture D.P.C.
Hudson Loft, NYC
We designed this fixture for this specific location. The ceiling is vaulted and required a fixture that
Texas Lightsmith range hoods recommend 30" to 36" depending on the fan selection and wall mount vs island mount. http://www.texaslightsmith.com/range-hoods
Smoked or Fumed oak is a chemical reaction that changes the color of the wood. Finish can be an oil or a poly - they require different maintenance and care and have different levels of durability (depending on the brand).
Yes, honed and sealed. All stones have their positives and negatives. Slate is soft so you need a durable sealant and apply when required depending on use.
Matte white cabinet doors with no hardware.
backsplash have pivoting windows that open up into the hidden pantry space, allowing the family to pass items back and forth. Bar stools: Restoration Hardware; side table: clients' own; oven: Miele; range: Viking
Artistic Designs for Living, Tineke Triggs
Portola Valley residence
Salvaged sinks. Using salvaged materials provides an opportunity to get creative. Nearly anything bowl-like can be a sink, as long as a hole can be drilled in it and a drain can be connected.
Salvaged sinks. Using salvaged materials provides an opportunity to get creative. Nearly anything bowl-like can be a sink, as long as a hole can be drilled in it and a drain can be connected. This salvaged cast-metal basin makes a stunning and character-rich counterpart to the mod orange walls.
Thom Filicia Inc.
Roller shades. Whether you have a bathroom on the first floor or on the second, closely situated neighbors can require privacy. This easy-to-install roller shade is perforated, allowing light to filter through.Tip: Since window treatments at the back of tubs may be
Roller shades. Whether you have a bathroom on the first floor or on the second, closely situated neighbors can require privacy. This easy-to-install roller shade is perforated, allowing light to filter through. Tip: Since window treatments at the back of tubs may be hard
Inside mounted roller shade without a fascia plate along top. I always like having a fascia along the top to conceal the roll, looks more finished without the shade looks like a temporary solution.
Webber + Studio, Architects
did you find the cabinet hardware?
Where did you find the cabinet hardware?
What is the cabinet hardware used here?
Local Austin Hardware Supplier: Alexander Marchant http://alexandermarchant.com/category/products/hardware/cabinet/
like the layout of the tile and mellow feel but the hardware is bad
Choose a unique take on a traditional style. Three-hole faucets (those that feature individual controls for hot and cold water and require three holes for installation) are a common choice. Make yours distinct with a glamorous finish that resembles gold. Remember, quality faucets generally come with
LORRAINE G VALE, Allied ASID
stone vinyl and counters are standard white plain glue on sheets?? I'm allowed to paint walls, change lighting, change window treatments, and add hardware to the cabinet doors. I want to copy your kitchen as much as possible within my limits. Can you give me some advice? Thank you!!!
I had it professionally hung. They drilled through the tile and mounted a large plate hanger. Lorraine
Otherwise ask if you can add a backsplash that will contrast with your maple cabinets and white countertops, but at the same time, tone the white down. Hardware is easy-I used Oil Rub Bronze to coordinate with the stems othe pendants and add to the overall warmth of the kitchen. These are 5" pulls, from Top
platter over stove, hanging lighting over bar. My hardware on cabinets!