Houzz is the new way to design your home.
1,126 pedal valve Home Design Photos
To search for all words in exact order, you can use quotes around the term.
Example: "pedal valve"
To search for all words in any order, add "+" before each word.
Example: +pedal +valve
Carisa Mahnken Design Guild
Bathroom1 Hill House
want a pedal sink?
Robert Nebolon Architects
Broadway Terrace House
Shut-off valves are located in the
t-off Valves for the sink are located in the room below to be out of view.
Castle Building & Remodeling
Contemporary House Remodel and Addition
I want to do this, but would like to know where to position gas shut off as well as water valves so that there is good access. Also, is it possible to plug in the appliances and then push them into the tight space?
water valves are behind the unit, accessible through the access panel in the adjoining closet... The electrical cords and gas whip are long enough to attach just outside of the closet before pushing into the opening; much like a conventional range in a kitchen. The dryer vent would be hooked up after
Brooktree Equities, Inc
9025 Dicks St, West Hollywood, CA
water Valve: Kohler KT14668-4-CP Loure Rite-Temp Valve Trim W/ Diverter; Polished Chrome; Brass Construction; Rite-Temp Valve Required The Shower Door Handle was bought from the glass guy, if you send me your email I will send you all my plumbing items.
like the valves being outside of the shower so you don't start under a cold shower.
wall. Valves are located as you walk in
beTM interior design & project management
shutoff valves (both by Kohler) is polished nickel. the trap is probably from the plumber and may or may not be polished nickel (may be chrome)
book. The valves and trap finished in gold polish the look, making it clear that the designers left no detail unexplored.
S.M. CONTRACTING INC
control valve.Tip: Have your tile layout ready if you want the hose's connection to fall in the center of a tile or on a grout joint. Siting the connection on a grout joint is easier for the tile installer, but most times it looks best to have it entirely on a full tile.
Valve and hose placement