Make Your Own Marble Lamp Base
 

Make Your Own Marble Lamp Base

What Houzz contributors are saying:

Sarah Dorsey added this to Make a Marble Lamp Base With Tile
1. To cut the ⅛-inch plywood so that it fits flush inside the lamp base to form the top and bottom, first arrange the marble baseboard tiles in a square by overlapping the bullnose side over the square side, then measure inside and cut to fit. Mine measured 3⅝ inches by 3⅝ inches. Drill a ⅜-inch hole in the center of one of the squares.Tip: If you don’t have a saw to cut the wood, ask a staffer at the home improvement store to cut it for you.

What Houzzers are commenting on:

Madelain Kitshoff added this to madelain_kitshoff's ideas
August 13, 2014
How to make lamp.
sophie31 added this to sophie31's ideas
May 25, 2014
1. To cut the ⅛-inch plywood so that it fits flush inside the lamp base to form the top and bottom, first arrange the marble baseboard tiles in a square by overlapping the bullnose side over the square side, then measure inside and cut to fit. Mine measured 3⅝ inches by 3⅝ inches. Drill a ⅜-inch hole in the center of one of the squares. Tip: If you don’t have a saw to cut the wood, ask a staffer at the home improvement store to cut it for you.
reginagayle added this to reginagayle's ideas
April 17, 2014
1. To cut plywood to fit inside lamp base to form top & bottom, first arrange the tiles in a square by overlapping the bullnose side over the square side, then measure inside & cut to fit. Drill a 3/8" hole in the center of one of the squares
jonutz added this to Joann Ideabook
April 16, 2014
Making your own lamp
driskellkaren added this to msc
April 16, 2014
LAMP: for top and bottom, need two 3 5/ths in. plywood squares (measure with tiles. DRILL hole in center of 1
corkywells added this to Bathroom Ideas
April 13, 2014
easy, and rich looking.
People who liked this photo also liked
Category
Other  
Keywords
none  
© 2015 Houzz Inc. Houzz® The new way to design your home™