Julie Kim
Architects & Designers
DIY Charging Station

DIY Charging Station

What Houzz contributors are saying:

Use tacks to hold the elastic band in place at a corner while you wrap the larger plank in your desired pattern. Assemble the three pieces and clamp everything together for screwing. Remember to predrill holes so that you don’t crack the wood while screwing.

What Houzzers are commenting on:

jlavallec added this to diseñodemob
May 8, 2014
Anne Power added this to poweranne’s ideas
May 7, 2014
Then use a second clamp to clamp a scrap piece of wood at the angle you intend to saw. The scrap wood will serve as a miter box. Keep your saw as straight as possible and use many quick, light strokes. Saw the same angle on the other end of the narrow side piece. Repeat this for the second narrow side piece. Use coarse sandpaper to correct any asymmetry in the two narrow side pieces. Then sand all three pieces with a medium-grit sandpaper. Continue to the next step if you prefer an unfinished look. Otherwise, finish with a stain or paint now.
ami_gar added this to bedroom
May 6, 2014
hide wires with frame
fafavaldi added this to fafavaldi's ideas
May 5, 2014
objetos criativos
© 2015 Houzz Inc. Houzz® The new way to design your home™