TS201 Acrylic SB-25 Topical Sealer w/ High Gloss (5 gal.)

$199.95
Listed Price:
Quantity: Out of Stock
Low VOC, Solvent Based Sealer & Curing Agent for Decorative Concrete, Pavers & Exposed Aggregate

Product Description
TS201 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a 350 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS201 provides durable protection, superior color enhancement, and high gloss "wet look" appearance. It combats freeze/ thaw, repels salt and oil, limits stains and molds, resists yellowing, blocks efflorescence and dusting, increases surface durability, and reduces scaling and spalling. Solvent base allows for superior adhesion. TS201 has a clear appearance. Upon proper application, the substrate will have a "wet look" with high gloss finish when dry. Color tints are available in a selection of colors.

Recommended Uses
TS201 was originally developed for commercial and industrial applications and is widely used throughout North America to this day for those applications. Concrete Sealers USA is now also making this professional grade sealer available to the residential market so small contractors, applicators, and do-it-yourselfers can enjoy the same superior benefits that architects, engineers, and large contractors have enjoyed for years. TS201 is recommended for curing newly finished concrete and for sealing existing concrete surfaces such as decorative concrete, stamped concrete, acid stained concrete, stenciled concrete, overlaid concrete, exposed aggregate, brick or stone pavers, concrete pavers, and other broom finished or troweled finished concrete surfaces. It is ideal for sealing commercial and residential interior concrete floors, garage floors, driveways, sidewalks, walkways, porches, steps, pool decking, and patios. Suitable for horizontal or vertical and interior (with proper ventilation) or exterior applications.

Limitations
TS201 is designed to work only on concrete and masonry substrates and is not intended for asphalt. This product may damage vegetation. Avoid contact with glass, vinyl, plastic, wood, and metal. Sealer may be damaged if frozen prior to use. Not intended to seal cracks or for use where severe hydrostatic pressure is present. The coefficient of friction of the surface may decline with each sealer application. This can be offset by applying an anti skid compound (ex. sand) when sealer is still wet and prior to it drying. Certain tile adhesives may not bind to TS201. Always conduct test to confirm adhesion. The Company does not warranty specific performance results or compatibility with products manufactured by others. The Company shall bear no liability, other than replacement of defective product. A small test must be conducted prior to application. Based upon this test, the purchaser shall determine for themselves the suitability of this product for the intended use.

Environmental and Regulatory
TS201 contains petroleum distillates and 350 g/L Volatile Organic Compounds (VOC) and is combustible. This product is considered a hazardous chemical under OSHA Hazard Communication Standard (29CFR 1910.1200). Keep away from heat, sparks, and open flames. Keep containers closed until ready to use. Provide adequate ventilation. To prevent vapor build up and possible explosion, open door and windows and provide cross ventilation. Do not smoke when using. Solvent vapors can cause respiratory irritation. Contact may cause skin or eye irritation. Using with adequate air ventilation, eye protection, and gloves is recommended. Do not reuse container without commercial cleaning. Dispose of in accordance with applicable federal, state, and local regulations.

Manufactured in the USA for Concrete Sealers USA.

Surface Preparation
The surface must be structurally sound and porous enough to allow penetration and adhesion. Surfaces should be clean and free of dust, dirt, debris, mildew, oil, grease, paint or other surface coatings, and other contaminants. Prior to application, any surface defects, cracks, voids, and joints must be properly sealed or filled.
Application
Always test adhesion prior to application. Surface should be dry for proper application of sealer. Wet or damp surface may result in white appearance and poor adhesion. Product is a one part system and requires no special mixing. Stir material thoroughly before and during application. Do not apply below 40°F or above 85°F during the application and drying period or to exterior surfaces if rain is expected within 24 hours after application. Apply with low pressure solvent resistant sprayer or medium nap roller for best results. For existing substrates, apply a uniform film to ensure complete coverage of the surface. If additional coats are desired, wait approximately 4-6 hours between coats. Full drying time is approximately 24-48 hours. Additional coats will yield a higher gloss and enhance overall surface protection. Over application may result in bubbles or poor adhesion. For freshly placed substrates, apply TS201 after all bleed water is gone, finishing is complete, and the concrete will withstand the weight of a person and not be marred. Apply an even coat to ensure complete, uniform coverage of the surface. Over application may result in whiteness which generally dissipates with time or final sealer application. Clean application materials with mineral spirits or solvents immediately. Clean drips and over spray with solvent while still wet. If not cleaned immediately, the sealer may leave a residue. Dried sealer can be removed with solvents.
Finish
High gloss and clear.
Coverage Rate
250-350 sq. ft./Gal. as a cure and seal. 350-450 sq. ft./Gal. for existing substrates. 350-450 sq. ft./Gal for additional coats. Coverage rates are approximate and for estimating purposes only.
Drying Time
Dry to touch in approximately 1 hour, for foot traffic in 4-6 hours, and for vehicle traffic in 24-48 hours. Drying time is for estimating purposes only based upon temperature and humidity.
Shelf Life
2 years in unopened in protected storage.
Safety and First Aid
Eyes: Flush with water for at least 15 minutes.
Skin: Wash thoroughly with soap and water.
Inhalation: Move subject to fresh air.
Digestion: Consult physician immediately.

Product Specifications

Manufactured By
Concrete Sealers USA  
Sold By
Concrete Sealers USA  
Width
12.5" 
Depth
12.5" 
Height
15.0" 
Materials
Liquid 
Category
Hardware  
Style
Modern 
Ready to ship to the Continental U.S. in 2 - 3 days.

Product Description

Low VOC, Solvent Based Sealer & Curing Agent for Decorative Concrete, Pavers & Exposed Aggregate

Product Description
TS201 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a 350 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS201 provides durable protection, superior color enhancement, and high gloss "wet look" appearance. It combats freeze/ thaw, repels salt and oil, limits stains and molds, resists yellowing, blocks efflorescence and dusting, increases surface durability, and reduces scaling and spalling. Solvent base allows for superior adhesion. TS201 has a clear appearance. Upon proper application, the substrate will have a "wet look" with high gloss finish when dry. Color tints are available in a selection of colors.

Recommended Uses
TS201 was originally developed for commercial and industrial applications and is widely used throughout North America to this day for those applications. Concrete Sealers USA is now also making this professional grade sealer available to the residential market so small contractors, applicators, and do-it-yourselfers can enjoy the same superior benefits that architects, engineers, and large contractors have enjoyed for years. TS201 is recommended for curing newly finished concrete and for sealing existing concrete surfaces such as decorative concrete, stamped concrete, acid stained concrete, stenciled concrete, overlaid concrete, exposed aggregate, brick or stone pavers, concrete pavers, and other broom finished or troweled finished concrete surfaces. It is ideal for sealing commercial and residential interior concrete floors, garage floors, driveways, sidewalks, walkways, porches, steps, pool decking, and patios. Suitable for horizontal or vertical and interior (with proper ventilation) or exterior applications.

Limitations
TS201 is designed to work only on concrete and masonry substrates and is not intended for asphalt. This product may damage vegetation. Avoid contact with glass, vinyl, plastic, wood, and metal. Sealer may be damaged if frozen prior to use. Not intended to seal cracks or for use where severe hydrostatic pressure is present. The coefficient of friction of the surface may decline with each sealer application. This can be offset by applying an anti skid compound (ex. sand) when sealer is still wet and prior to it drying. Certain tile adhesives may not bind to TS201. Always conduct test to confirm adhesion. The Company does not warranty specific performance results or compatibility with products manufactured by others. The Company shall bear no liability, other than replacement of defective product. A small test must be conducted prior to application. Based upon this test, the purchaser shall determine for themselves the suitability of this product for the intended use.

Environmental and Regulatory
TS201 contains petroleum distillates and 350 g/L Volatile Organic Compounds (VOC) and is combustible. This product is considered a hazardous chemical under OSHA Hazard Communication Standard (29CFR 1910.1200). Keep away from heat, sparks, and open flames. Keep containers closed until ready to use. Provide adequate ventilation. To prevent vapor build up and possible explosion, open door and windows and provide cross ventilation. Do not smoke when using. Solvent vapors can cause respiratory irritation. Contact may cause skin or eye irritation. Using with adequate air ventilation, eye protection, and gloves is recommended. Do not reuse container without commercial cleaning. Dispose of in accordance with applicable federal, state, and local regulations.

Manufactured in the USA for Concrete Sealers USA.

Surface Preparation
The surface must be structurally sound and porous enough to allow penetration and adhesion. Surfaces should be clean and free of dust, dirt, debris, mildew, oil, grease, paint or other surface coatings, and other contaminants. Prior to application, any surface defects, cracks, voids, and joints must be properly sealed or filled.
Application
Always test adhesion prior to application. Surface should be dry for proper application of sealer. Wet or damp surface may result in white appearance and poor adhesion. Product is a one part system and requires no special mixing. Stir material thoroughly before and during application. Do not apply below 40°F or above 85°F during the application and drying period or to exterior surfaces if rain is expected within 24 hours after application. Apply with low pressure solvent resistant sprayer or medium nap roller for best results. For existing substrates, apply a uniform film to ensure complete coverage of the surface. If additional coats are desired, wait approximately 4-6 hours between coats. Full drying time is approximately 24-48 hours. Additional coats will yield a higher gloss and enhance overall surface protection. Over application may result in bubbles or poor adhesion. For freshly placed substrates, apply TS201 after all bleed water is gone, finishing is complete, and the concrete will withstand the weight of a person and not be marred. Apply an even coat to ensure complete, uniform coverage of the surface. Over application may result in whiteness which generally dissipates with time or final sealer application. Clean application materials with mineral spirits or solvents immediately. Clean drips and over spray with solvent while still wet. If not cleaned immediately, the sealer may leave a residue. Dried sealer can be removed with solvents.
Finish
High gloss and clear.
Coverage Rate
250-350 sq. ft./Gal. as a cure and seal. 350-450 sq. ft./Gal. for existing substrates. 350-450 sq. ft./Gal for additional coats. Coverage rates are approximate and for estimating purposes only.
Drying Time
Dry to touch in approximately 1 hour, for foot traffic in 4-6 hours, and for vehicle traffic in 24-48 hours. Drying time is for estimating purposes only based upon temperature and humidity.
Shelf Life
2 years in unopened in protected storage.
Safety and First Aid
Eyes: Flush with water for at least 15 minutes.
Skin: Wash thoroughly with soap and water.
Inhalation: Move subject to fresh air.
Digestion: Consult physician immediately.

Need more info? Ask a question
Sponsored Products
Refined Rustic Collection Appliance Pull
Signature Hardware
Casual Luxury Dark Bronze Wall Bracket
$176.00 | Bellacor
Grohe Geneva Thermostat Trim with Cross Handle - Infinity Brushed Nickel
Modern Bathroom
Madison White One-Light Wall Bracket
$146.00 | Bellacor
JUSTO Wall Hook by Blomus
$17.99 | Lumens
Grohe Geneva Pressure Balance Valve Trim with Cross Handle - Oil Rubbed Bronze
Modern Bathroom
Keywords
none  
© 2014 Houzz Inc.
Houzz® The new way to design your home™