Jeff Sheats Designs, Inc Hi there! The vanity was full custom from a cabinet shop, including the color. The top drawer has a cut out for the p-trap drain assembly inside. I had the mirror frame made to match from the same shop. Thanks for asking! Take care. ~~ Jeff

dicarloj Thanks Jeff.

Jeff Sheats Designs, Inc Hi Lisa! The countertop material is a very cool recycled quartz material from Ceasarstone #7141 in 3cm thickness. It's got bits of broken, old mirrors in it giving it great sparkle. Thanks for asking! Take care ~~Jeff

Lisa1209 Thanks Jeff!

Jeff Sheats Designs, Inc Thanks for asking! The faucet is manufactured by Delta. It's part 754-SS and really tall to make it over the custom copper vessel sink! Hope this helps. Take care ~~ Jeff

Jeff Sheats Designs, Inc Thanks for asking!

http://www.columbiaflooring.com/series.cfm?collection_id=4

See Antiqued Linene Ash color on this page. This is the exact wood we used in the 3/4" solid plank.

Hope this helps you! Take care ~~Jeff

Jeff Sheats Designs, Inc Thank you so much for telling me that. My team worked very hard on this project, and in the end I believe it turned out magnificent! Take care ~~ Jeff

Jeff Sheats Designs, Inc Hi Colleen - No it is not bronze. It is a sold brass body faucet with a stainless steel finish and a ceramic disk valve made by Delta Faucet. It is their Victoran collection single handle faucet part# 754-SS. I don't recommend bronze plumbing fixtures as they patina quickly and heavily - unless you like that look! Hope this helps! Thanks for asking! ~~Jeff

Colleen Krcelich Thanks! Trying to figure out what kind of faucet to use with my copper sink in my new house.

cbcaulfield Where did the light sconce come from? Love it!

Jeff Sheats Designs, Inc The shell prints are from fulcrumgallery.com. Hope this helps! --Jeff

unasloras Could you tell me who manufactures this facet?

Jeff Sheats Designs, Inc The faucet is manufactured by Delta. It's part 754-SS and really tall to make it over the custom copper vessel sink!

carolladwig You could give us a similar color.

Jeff Sheats Designs, Inc I wish I could - I no longer have any of the wood finish samples in my archives on this project to match up a paint chip for you or I would do it. Thanks for asking!