Summit Design Remodeling, LLC Hi bmailloux,
Glad you like our project. The glass is custom measured, but we always specify the glass height at 78" - so in this case if you subtract the 36" wall height from 78" that leaves a 42" glass panel.

Laurie Crum
Kitchen & Bath Designer
http://SummitDesignRemodeling.com

bmailloux Thank you so much for answering my question so quickly.

Summit Design Remodeling, LLC Hi BWV133,
Thank you for your inquiry. I pulled our file on this project and this bathroom was about 4'-10 1/2" wide as well. We converted the old tub to a shower stall. The knee wall is 36" high.

Hope this answers your questions.

regards,

Laurie Crum
Kitchen & Bath Designer
http://SummitDesignRemodeling.com

Summit Design Remodeling, LLC Hi Drak2000,
The vanity pulls are made by Amerock, item # 53031-G10. If you google that product number you can find several venders that sell this pull.

Thanks for your inquiry,

Laurie Crum
Design Consultant
http://www.summitdesignremodeling.com

drak2000 Thank you!

Summit Design Remodeling, LLC Hi cjhackett,
Thanks for your inquiry. The homeowner spent more money on the wall and accent tile and had to save some money on the floor tile to keep the project in budget. So the bath floor tile is a less expensive ceramic tile that we purchased from Home Depot. I don't have records on the name of it because I think the homeowner furnished it and we installed it. I don't know if they still sell it. The tile had an olive green and dark charcoal grey coloring with a bit of brown mixed in. I do know it was a 12"x 12" size.

I'm sorry I can't be more specific.

Laurie Crum
Design Consultant
www.summitdesignremodeling.com

Summit Design Remodeling, LLC Hi Christisue78,
Thank for your interest in our bath design. The vanity cabinets are from Medallion, Designer series, maple wood species, mendocino door style and the finish is Chestnut. http://medallioncabinetry.com/. You will need to find a Medallion dealer in your area.

The sink is a hand hammered metal sink with a nickel silver finish. It is made by Bates & Bates it is #1417 Hammertone. It is pretty expensive, but very beautiful. Here is the link: http://batesandbates.com/products/sculptured_metals_collection/lavatories/

This sink and vanity are not the focal points of this photo. The sink is very shiny in real life like a chrome finish. You might want to look at some other photos of ours on Houzz or on our website.
Hope this helps you out!!

Laurie Crum
Interior Designer
http://www.SummitDesignRemodeling.com

Summit Design Remodeling, LLC HI akwagner,
While it made the installation of the towel bar a little harder, we did decide to tile both sides of the knee wall. We thought it would look better. The wall tile we used was from Mosaic Tile Co. here is Fairfax, VA. It is a 12" x 12" called VS150 Polo Texture Buenos Aire.

Thanks for your inquiry.

Laurie Crum
Kitchen & Bath Designer
http://www.SummitDesignRemodeling.com

west4141 Laurie,
Could you also give me the dimensions of the room too? Thanks!

Summit Design Remodeling, LLC Hi West4141,
The overall dimensions of the bathroom are 4' 10" wide by 10' 5.25" long (or deep).
Thanks,
Laurie Crum
Kitchen and Bath Designer
http://SummitDesignRemodeling.com

PoshHaus Love the glass undermount sinks!

Summit Design Remodeling, LLC Hi PoshHaus, the lighting in that picture is dim where the sink is so it may look like glass but it is really a hand hammered chrome sink. Here is a better picture of it: