Bill Fry Construction - Wm. H. Fry Const. Co. This is it or similar: Duravit has a rectangular drop-in sink with two faucet holes and a round overflow:
2nd floor Washbasins #049112
http://www.duravit.us/website/homepage/products/product_overview/series/2nd_floor.us-en.html/p-91419
Width: 47 1/4" Inch
Duravit's website has a "find a retailer" link:
http://www.duravit.us/website/homepage/service/find_a_retailer.us-en.html;jsessionid=07E73E90CDE0B8A68D287E84464CF4FA
:) Rhoda

Laiwu Yixin Arts&Crafts Co., Ltd I am a factory for mosaic mirror in China, i am looking for importor, if you are instereted in, pls email me: kevin@lwyixin.com

Laiwu Yixin Arts&Crafts Co., Ltd I am a factory for mosaic mirror in China, i am looking for importor, if you are instereted in, pls email me: kevin@lwyixin.com

kerspine duravit 2nd series
47+ long

millergk2000 No, I never received an answer.

letterip Duravit 2nd Floor Series Washbasin Model #049112 Length 1200mm

Zieba Builders, Inc. Hi, and thanks for asking! Without digging out the plans (this project was completed several years ago), I think the vanity is approximately 84 inches in length, with cabinets custom built and fitted to the space. Good luck!

Bill Fry Construction - Wm. H. Fry Const. Co. It sounds like the tiles were not applied to a properly prepared surface.
Separately, check out this youtube:
Another item not mentioned on this video is the use of tile spacers, shims, or wedges. When I watch the professionals that Bill hires for tile installation, I realize that there is a lot to getting it right. :) Rhoda

Zieba Builders, Inc. A material is only as good as its installation, sadly. So here are some tips for next time:
First, the wall needs to be perfectly flat and plumb. Check the wall surface in both directions with a long level before opening the first box of tile. Second, make sure you strike a level line or attach a level guide board to the wall when you lay the first course (ideally the one at eye level). Third, step away from the wall every couple of courses to make sure it "looks right" before proceeding further. Make minute adjustments before continuing, before the mastic has set. Finally, if it's wrong, pull it out and try again.

Good luck!

Pre-matted tile squares are easiest to work with.

PoshHaus The faucets on my sink were Hansgrohe PuraVida...

http://www.poshhaus.com/store/Search.aspx?catid=0&type=and&searchterms=hansgrohe%20puravida

shanecotto What kind of tile is that

Kerrie L. Kelly Because of the sleek style and precise wall-to-wall installation, it looks like this is custom made. If you wanted to achieve the same look with pre-fabricated cabinets, look for a slab (no details) door style that can be stained dark. Part of the "cool factor" of this installation is the concrete looking solid surface top that drops around the side of cabinet, too. Not very expensive to incorporate that extra piece. In fact, it may even be the extra slab piece from the sink cut out!