Bill Fry Construction - Wm. H. Fry Const. Co. This looks like a Kohler Memoirs® Stately toilet. It comes with several different options such as elongated bowl, round bowl, lever location etc…
Here’s an example: Kohler Memoirs® Stately Comfort Height® two-piece elongated 1.28 GPF toilet with Class Five® flush system and left-hand trip lever K-3817-0.
http://www.us.kohler.com/us/Memoirs-stately-Comfort-Height-two-piece-elongated-1.28-GPF-toilet-with-Class-Five-flush-system-and-left-hand-trip-lever/productDetail/Toilets/428459.htm?categoryId=430138
:) Rhoda

Sustainable Home it was breadboard, basically a paint grade plywood sheet routed out in a bead board pattern.

Sustainable Home I assume that you mean the accent tile. It came in a sheet that was 3 " h, and 12" long. It was mesh backed.

Sustainable Home As I recall, it was the Dal tile product, but it is a couple of years now since I designed this bath. Thank you so much for the kind words, I loved this project and these clients, it was a pleasure to work on this home.

benjijk http://tiledaily.com/2011/12/14/octagon-porcelain-mosaic-black-and-white/

Didnt realize I hadn't posted the link.

jimmordino Could you explain that more? Are you saying there is no bullnose the entire verticle edge? The edge tiles appear to be wider than a simple 1/4 round tile trim. Any chance that you have a closer shot of that transition? It really is nice.

Sustainable Home the tile is on concrete backer board so it is a 1/4 round rather than a bullnose. Does that help? I could try and go past their house, but don't know how soon I could do that and get a picture up.

The Shabby Nest Valspar's Lament Blue is a similar color.

3D-Tile-Design - Bertram Tasch Hello birdiee,

Tiles have most common sizes measured in mm. Only a couple tiles produced in the USA and Mexico have sometimes imperial sizes.

A single mosaic tile like the accent / ornamental border is usually 25 mm x 25 mm (1"x1") and sometimes 20 mm x 20 mm (13/16 x 13/16) Which is the case here.

So when you count the mosaic tiles, there are ca. 7 pcs. per 1 white tile. 7 x 20 mm + 140 mm + 7 joints x ca. 1 mm + 7 mm in total = 147 mm. So the wall tiles are ca. 150 mm x 150 mm or in imperial: 6" x 6" (nominal)

Here is another way to calculate it: A bathtub is usually about 750 mm wide. You can count 5 tiles above the tub. 750 mm : 5 tiles = 150 mm

So the size of the tiles is most likely 150 mm x 150 mm (6" x 6")

If you have any further questions or if you need any advise, we will be glad to help you.

Regards,

3D-Tile-Design - Bertram Tasch
Maple Ridge, BC (Greater Vancouver)
http://www.3D-Tile-Design.ca

Sustainable Home yes, that was a 4" by 8" tile. I have used the one by American Olean for a couple of projects, and it is one of the most reasonable ones I have found. Several tile manufacturers make this size.

Sustainable Home This was one project where the clients selected their own plumbing fixtures, I will check with the client and get back to you!

tmcorkum that would be excellent! thank you :)

annap22 no because i don't know what grout, is or i would help

jatcagirl thank you! and thanks to everyone who helped me figure this out :-)

Sustainable Home Good luck with your tile and your contractor!!!

limerickclifton Kohler Memoirs Collection. It appears to have a round bowl instead of elongated. The pedestal sink is from the Memoirs Collection, as well.

Sustainable Home It is an ordinary 4 by 4 tile set in a running bond, like bricks, to make it look fresher!

rsvatalaro The tiles don't look square to me, are they really 4x4?

The Shabby Nest Benjamin Moore's Gray Lake is a similar color.