Chris Hill
Media & Bloggers
Neat Little Project: Create A Simple Entry Bench
 

Neat Little Project: Create A Simple Entry Bench

What Houzz contributors are saying:

Attach the RailPosition the rail centered on the ends of the legs without the notches as shown in Figure 3. Drive the screws through the pilot holes in the legs and into the rail. This will be much easier if you have a set of 36-inch clamps to hold the parts in place.

What Houzzers are commenting on:

abco007 added this to abco007's Ideas
November 19, 2013
Bench
nwilliams1121 added this to nwilliams1121's Ideas
October 19, 2013
Extra seating
tree8021 added this to tree8021's Ideas
July 23, 2013
Need this
Linda Friesen added this to linda_friesen's ideas
June 27, 2013
design for the bench
raiderx added this to raiderx's ideas
June 26, 2013
GREAT PROJECT
jeannieb4 added this to jeannieb4's ideas
June 26, 2013
Attach the Rail Position the rail centered on the ends of the legs without the notches as shown in Figure 3. Drive the screws through the pilot holes in the legs and into the rail. This will be much easier if you have a set of 36-inch clamps to hold the parts in place.
maurabuller added this to maurabuller's ideas
June 26, 2013
Beginner project Jeremy might like.
wtravis added this to wtravis's ideas
June 26, 2013
entry bench 3
tbvegas added this to tbvegas' ideas
June 26, 2013
Simple bench
Category
Other  
Keywords
none  
© 2015 Houzz Inc. Houzz® The new way to design your home™