Sometimes original design elements can be beneficial to a new design and can be reincorporated. Other times they can be a hinderance. In this home, the three doors into the kitchen prevented a refrigerator from fitting into the space. The homeowners had to walk into a separate breakfast sunroom to gather their perishables for a meal. With a little thought to the walking flow, this was easily rectified. A little ingenuity made it possible to keep the original wainscot in the dining room in place while cutting out the upper portion as the building load support beam was blended into the original decorative ceiling soffit.
Design Set Match Hi Duckie,
This roll out drawer was made by the cabinet company. If you are placing a new cabinet order, you should be able to order it through them. Otherwise, if this is an add on item to your existing kitchen, you will need to measure your cabinets interior and clearances around the plumbing so that it will fit properly and you can order one through most cabinet shops. You can also find a similar item in a mesh or wire basked by Elfa through the container store. I hope this was helpful for you!
This roll out drawer was made by the cabinet company. If you are placing a new cabinet order, you should be able to order it through them. Otherwise, if this is an add on item to your existing kitchen, you will need to measure your cabinets interior and clearances around the plumbing so that it will fit properly and you can order one through most cabinet shops. You can also find a similar item in a mesh or wire basked by Elfa through the container store. I hope this was helpful for you!