A do it yourselfer's dream this ready to build kit comes with what you need to get started on the ultimate swing set! This kit includes assembly directions, 24 time saving brackets, 4" x 4" construction. Optional Cool Wave slide, Discovery Mountain, climbing rocks, swing hangers, child swing, Iron Man Rings, steering wheel, periscope, and Anchor It playground anchor set are available at an additional cost. Lumber and swing set hardware are not included. Features: -Comes with assembly plan, 24 time saving brackets, 4" x 4" construction. -Lumber NOT included. -Optional Cool Wave slide mounts to deck height ranging 3'6" - 4'4" and requires one 2" x 4" x 8' piece of lumber for mounting. -Slide holds up to 250 lbs. -Requires one 2" x 4" x 8' piece of lumber for mounting. -Optional Discovery Mountain easily attaches to 4' to 5' deck heights holding up to 450 lbs. -Optional climbing rocks come with 4 climbing holds and a weight capacity of 230 lbs when completed. -Require hardware and lumber. -Optional child swing seat is a one piece design that can hold up to 55 lbs. -Optional swing hanger attaches to metal or wooden swing beam holding up to 115 lbs. -Optional Iron Man Rings boost strength and stamina with a weight capacity of 75 lbs. -Optional plastic steering wheel and periscope adds to the fun. -Anchor It playground anchor set is recommended for all swing sets. -All items are available at additional cost. -Other possible accessories for this kit are Merry Go Round, extra duty swing seat, trapeze bar and more. -Kit meets all ASTM (American Society of Testing Materials) requirements for safety. -41' sq ft. area with 5' - 7' high deck. -10 play activities. -Estimated building time: 5-10 hours. -Limited 5 year warranty. Lumber Specifications: -Three 2" x 4" x 8'. -Eleven 2" x 4" x 10'. -Seven 5/4" x 6" x 10'. -Fifteen 5/4" x 6" x 12'. -Eight 4" x 4" x 8'. -Five 4" x 4" x 10'. -One 4" x 6" x 12' or two 2" x 6" x 12'. -Rock Wall requires one 2" x 4" x 8', one 2" x 4" x 10', and three 5/4" x 6" x 10'. -Discovery Mountain requires three 2" x 4" x 8'. -Cool Wave Slide requires one 2" x 4" x 2'. -Optional Ladder requires one 2" x 4" x 8' and two 2" x 4" x 10'. Nail and Screw Specifications: -Must be ACQ compatible. -1# 4D galvanized nails, or 1# 8 x 1 1/4" screws. -1# 8D galvanized nails, or 1# 8 x 2" screws. -4# 10D galvanized nails, or 4# 8 x 2 1/2" screws. **Please Note: Swing-N-Slide products are intended for residential use only, and will only be shipped to residential addresses.**