Venegas and Company Thank you for your inquiry! The backsplash tile was sourced by the interior designer from Discover Tile in the Boston Design!

Venegas and Company The ceiling was not in our scope of work but we believe this is a semi-gloss finish. We recommend the ceiling to have a slight sheen!

Venegas and Company Thank you for your inquiry! The island is stained butternut.

Cindy Moore So pretty! Thank you.

Foley Fiore Architecture We are the Architects for the project. The ceilings are 4" v-groove panels from Nantucket Beadboard Company (available in 4x8, 4x10 or 4x12 sheets).

timber12 They look like 6" v-groove

Cynthia Taylor-Luce You need a minimum of 42" clearance.

Venegas and Company Thank you for your inquiry. We do our best to keep the distance 39" to 42" and it is never less than 39". Sometimes, depending on the layout and what's on the island, we need more room and go to 45". Every kitchen is slightly different, good luck in your design.

Venegas and Company Thank you for your interest! A decorative tile centerpiece such as this one can be done by almost any reputable tile showroom or installer. We recommend Tile Showcase and Discovertile for our clients - both located in the Boston Design Center. Good luck!

Foley Fiore Architecture Hi Wuftwin,
We are the Architects for the project and designed the custom tile backsplash based on family photographs belonging to the homeowner. The mosaic was fabricated by Discover Tile.

Venegas and Company Thank you for your inquiry, but this was sourced by the interior designer.

Venegas and Company You're welcome! Good luck with your project!

newhome4us Can you tell me how they seamed the island top...does it run from left to right or toward the front and back

Venegas and Company Thank you for your inquiry! The ceiling is 94" to the underside of the beams and then the beadboard ceiling is about 2" higher, 96".

Venegas and Company Thank you for your inquiry! I'm sorry, but I do not have further information regarding the flooring; it was sourced by the builder.

Foley Fiore Architecture We are the Architects for the project and specified the flooring. It is select grade Walnut, random widths, from Carlisle Flooring.

Venegas and Company The ceiling was sourced by the builder, but I believe they are paint grade maple boards and finished after they were installed. I hope this helps!

Foley Fiore Architecture We are the Architects for the project. The ceilings are 4" v-groove MDF panels from Nantucket Beadboard Company (available in 4x8, 4x10 or 4x12 sheets).