Houzz is the new way to design your home.
40 fabric Asian Outdoor Design Photos
Joan Robey Design
Joan Robey Design
fabric panel roof for shade.
Woodson & Rummerfield's House of Design
Beverly Hills Estate
Trina Turk fabric
backyard- increase pebble paths, add mulch around garden beds, kill grass first and put layer of week block fabric before laying mulch.
Prestige Residential Construction
Canterbury Court Custom Home
courtyard steel fabrication
Charles McClure - Professional Site Planning
Charles McClure, landscape architect
gate, custom fabricated in iron or steel, painted or powder-coated - this would also be nice with different openings, maybe something more Arts & Crafts? I love the overall
Shade Sails Over Deck & Garden
years and counting. "This is a resilient product," says Otto. "The raschel knit of the fabric means if it is punctured, the puncture will not spread." The fabric and thread also resist mildew.While some waterproof fabrics are on the market, they don't have the same stretching abilities and do not get this
Shade fabric warranties start at 10 years, but as Allen points out, that refers to UV degradation, not color fading. "Colors will fade a little bit each year, depending on the climate," he warns. "However, the cost of replacing the fabric will only run about 10 to 15 percent of the total cost of your
Anticmistic - Old Europe Lifestyle
The last foot or so of fabric at each end is unattached.
I love the way fabric is used here
Fabric hanging to block the sun
like the covered area with the sheer curtain like fabric hanging down
Add indian fabric to patio to add some interest.
Pergola/Cabana with draped fabric
idea for fabric draping
fabric and mechanism
Sheer fabric...fabric curtains...fabric draping...the fabric curtains
RH Factor Landscape Design
Cohen Residence Entry Path
It was likely a custom fabrication--the horizontal pieces mimic the fencing to the right. You can probably find a fabricator in your area who could make one for you. It looks like it has a metal frame inside with the horizontal
you (or your installer) would be adding the wood members after the fact, be sure you choose what fasteners you'll use, and communicate that to the fabricator, so they can tap the holes in the metal frame for you.