152 aluminum vinyl house siding Bath Design Photos

Joseph Scarpulla - Architect
Sands Point Residence
Ideabooks3,287
Questions3
What kind are windows are these ? Aluminum? Fiberglass?
results were stunning, and it cost around $22,000, including installation and finish work. Materials From Lowest to Highest Cost (in general): • VinylAluminium • Fiberglass • Wood • Composite • Glass Block Type of Window From Lowest to Highest Cost (in general): • Fixed • Sliding • Single hung or double
Materials From Lowest to Highest Cost (in general): Vinyl Aluminium Fiberglass Wood Composite Glass Block Type of Window From Lowest to Highest Cost (in general): Fixed Sliding Single
Materials from Lowest to Highest Cost (in general) Vinyl Aluminum Fiberglass Wood Composite Glass Block Type of Window From Lowest to Highest Cost (in general): Fixed Sliding Single hung or double hung Casement
“white marble” — michelle
Goforth Gill Architects
3 Reviews
Phinney residence master bath
Ideabooks6,755
Questions14
Who made the windows? Is it milgard? are they vinyl or fiberglass?
Can the frosted vinyl be used on glass shpwer doors ?
I'm struggling with the inverse for a renovation...72inch double sink vanity, with window in the middle and mirror on either side. I can't decide if it works...
obscure glass on the bottom? Does obscure glass let in the light? Thank you. I am thinking of using it for a bathroom window that faces a neighbor's house which we currently have a venetan blind on but it is mostly closed and gets dusty.
You might try contacting a shower door company to see if they can use vinyl.
O.K. It looks like regular privacy glass, but I thought I read something in the comment thread about it being vinyl, and leaving no residue, so I then thought it might be some sort of product that adhered to existing clear glass.??
“like the look of this for my bath” — cowbuyer
Michael Abrams Limited
21 Reviews
Master Bathroom
Ideabooks61,437
Questions75
Hello! Can you tell me if you use aluminum or brass channels to hold the shower glass panels? I am doing a steam shower with polished nickel hardware and don't know if I should spend the extra money for polished nickel coated brass channels or if aluminum with a polished nickel finish is ok. Also
Regarding the vanities, marble finish , and vinyl tile paint analogue....
certain translucency that probably can't be done in porcelain despite the insistence of the tile merchant. Third, would there be a paint analog to the vinyl wallcovering? We appreciate your time, and if you don't have time to answer we understand. Thanks again for posting your answers on Houzz.
supported? I want to do a shower like this with glass all the way across with a bench. My contractor says I have to atleast do a kneewall to support that side of the bench.
“Color scheme and wall paper” — norajean
Glenn Robert Lym Architect
9 Reviews
Half Bath
Ideabooks13,135
Questions9
i live in delaware, what is the brand name for this type of siding,
storage area. roght now their is a small kitchern, living room, family room, bedroom, and utilities room. this bathroom shows the exact type of metal siding i would like. nice job.
what did you coat the sob in so it it water tight? I am replacing a piece of stud wall at the side of my bath with Ian and tiling directly onto the bottom two foot but the rest will be exposed? is there a special kind of varnish or clear coating I
that moisture will get behind the tin and cause problems. How can this be done without worrying about moisture problems behind the tin? It's an old house with tongue & groove wall boards; I planned to put tile backer on the shower walls just as I would if putting ceramic tile up. Can you steer me in the
“Kinda digging the corrugated decking as a wall treatment” — Drew for you Designs
Green Mountain Construction & Design
Barrier-Free Shower Stall
Ideabooks11,934
Questions15
Kerdi. The slab, and stoneware tile are also set in some deep recesses with urethane. The exterior is aluminum siding, like the rest of the house, and I applied some roofing membrane before the siding was patched and before the window went in for the last time. There is a lot of redundancy. Shower water
was pretty sure neither the interior nor the exterior would be a problem. Finally, wood windows are not OK in shower stalls. But, PVC plastic or aluminum are not easy to glue Kerdi fabric on to either. I am advised Epoxy can work with PVC (PVC window parts are "welded" together) but I haven't found
found an epoxy yet which sticks long term. If anybody out there has a clear marine epoxy they use on plastic windows, please let me know. Aluminum seems to adhere to urethane caulk, pretty well. Feel free to look me up in Brooklyn to discuss this if you like.
“Shelves” — snrizeboy
DeForest Architects
7 Reviews
Hillside Modern
Ideabooks28,099
Questions36
can I use a frameless sliding glass door, with one side fixed with this design?
year and this is the first time I have actually been inspired to do a double vanity in our family bathroom. This bathroom works so well! The whole house is a real inspiration - well done!
Exterior doors keep rain from entering the house, and thresholds drain to outside. My question is how do you keep the door waterproof from both the outside and the inside? Thank you
Hi. In those situations we often use an aluminum grille made by Titus. They have a type of frame that has a minimal flange that can be set with the tile as opposed to a wider flange that site over
Good question. It helps that the door is all aluminum. If any water gets past the line of caulk between tile and door frame, there is flashing that will carry it out to the exterior. In reality, the shower
“Nice vanity” — teamdubre
Aria Design Inc
7 Reviews
Rockledge
Ideabooks7,539
Questions6
love the bath! What is the dark tile used with the aluminum panel?
Longer counter on one side of vanity
5. Include sparklePaint the town and all that jazz with a gorgeous feature panel like this glam one that’s made from a recycled, melted down aluminium product that a designer cleverly backlit to showcase the product’s unique tactile quality. Use it in conjunction with overhead or wall-mounted lighting
5. Donnez de l’éclatReproduisez les lumières de la ville avec un splendide panneau glamour, comme celui-ci, qui a été fabriqué à partir d’aluminium recyclé, qu’un designer a eu l’astuce de rétroéclairer pour mettre en valeur sa matière unique. Osez cette association et complétez-la avec des lampes
“handwash” — Clara
EAG Studio
3 Reviews
Pacific Heights Remodel and Addition
Ideabooks15,588
Questions38
is that mirror frameless? how can i make a frameless mirror look good from the side?
Love that fixed panel! How is it fastened? I see two clips on the left side is there anything on the tub? I love that it is frameless! Please let me know where I can get the clips to fasten the panel? Is it flexiable after
Metal windows. In this case, powder coated aluminum.
The plastic or vinyl version is more suitable if the tile is white and near a wet environment. Either way, it is paintable. However, depending on how far you want to take
Thanks so much. Was it vinyl or metal?
“Floor” — aochsendorf
© 2014 Houzz Inc.
Houzz® The new way to design your home™