Houzz is the new way to design your home.
619 fiberglass planter Bath Design Photos
Tracy Stone AIA
entry with planter and low views to the garden beyond. The shower now features a deck of ironwood, smooth-trowel plaster walls and an enclosure made of 3-form recycle resin panels with embedded reeds. The space is flooded with natural light from the new skylight above. Design Team: Tracy Stone, Donatella
Planter idea. Possibly shade instead of wall.
Foundation Landscape Design
love the outdoor planter against wall
Planter on side yard
Background planters...Front planters...concrete planters
Custom Kitchens by John Wilkins Inc
white fiberglass shower pan and a frame-less shower door. This type of shower pan would allow the use of large scale wall tiles without having to use smaller scale flooring tiles, tiles which would have a great many more grout joints.
Shower. Fiberglass pan, tiled walls
fiberglass shower floor & layout
Divine Kitchens LLC
Divine Kitchens LLC
then the fiberglass and the solid Corian style and the problem with those is they can yellow, peel, and degrade over short periods of time. I was actually with someone recently who had a fiberglass one installed in 2007 that has cracked and is now leaking. The most secure we have done is the tile ready
not ugly fiberglass or acrylic? We don't have the $$ to tile the floor, am hoping there is an alternative.
Fiberglass shower base
fiberglass shower floor
Abramson Teiger Architects
coat on fiberglass. I suspect that if you had very hard or rusty water it would mark, but whether that would be worse than tile or fiberglass I have no clue.
PK Master bathroom remodel
acrylic & fiberglass freestanding tubs are lightweight
c and fiberglass tubs are lightweight and therefore more suitable for apartments and condos, where the floors are engineered to hold up to a certain limit. They are budget friendly and can emulate the forms of tubs made of more expensive materials, be they modern or traditional.
Xstyles Bath + More
strips of fiberglass cloth (the type used as crack isolation membrane) approximately 6" wide. Attach to walls above bench about 5" and the final 1" overlap onto bench using a paintable membrane such as TEC Hydraflex. When tiling, leave an 1/8" gap between the top of the bench and the bottom of the tile.
cut back fiberglass cloth just behind the surface of the tile. A razor blade will scrape excess off bench. I like to grout the joint and clear silicone over the top but you could use a color matched caulk. I don't like the color matched caulk though because it's not pure silicone. I hope this helps. We