18,506 warmlyyours1 Bath Design Photos

New Concept 180
5 Reviews
Janssen
Ideabooks42
Questions1
Is that WarmlyYours Infinity Towel Warmer? Thank you!
Yes it is! ...Good eye ;) ...and floor underneath the stone and hardwood is also heated by WarmlyYours TempZone™ mat.
“Sage cabinets” — courtneyedwards
Webber + Studio, Architects
8 Reviews
Caudill Lane
Ideabooks5,834
Questions11
Did you use spacers (1/16") or just stacked them? Thanks.
is what would be used for this tile application as the grout joints appear to be 1/16". Typically grout joints an 1/8" or less should be non-sanded and grout joints an 1/8" or bigger should sanded. Grout joints that are 1/8" can use either non-sanded or sanded. The sand acts as a filler and stabilizer
is what would be used for this tile application as the grout joints appear to be 1/16". Typically grout joints an 1/8" or less should be non-sanded and grout joints an 1/8" or bigger should sanded. Grout joints that are 1/8" can use either non-sanded or sanded. The sand acts as a filler and stabilizer
“Grey floor” — Kerry Levato
PPDS
Rough Hollow Parade Home 2010
Ideabooks23,301
Questions19
I'm trying to duplicate the tile pattern in the shower. Did you use two rows of the 1x1's for the accent strip
This is Sonoma Tilemakers' Minka Iridescent, either in 1x1 or 1/2x1/2. They have this picture on their website. This is what I'm using for my bathroom remodel, but in the 1x4 size. Its gorgeous tile.
They are rain glass! The dimensions shown here are 1'6"w x 5'-0"h for the lower section and 1'-6" square for the upper sections.
This is Sonoma Tilemakers' Minka Iridescent, either in 1x1 or 1/2x1/2. They have this picture on their website.
using a stripe of 1x1 in shower
“salle de bain” — cheikam
JCA ARCHITECTS
Ranch Remodel
Ideabooks84,423
Questions104
What size are the cabinet knobs? 1 or bigger?
1-1/4" knobs. In my opinion, the 1" knobs look a bit small unless it is a small door or drawer.
The mirrors are standard plate glass mirrors with a 1" bevel edge. They were made by a local glass manufacturer (quite inexpensive). The painted wood panels around that match the cabinetry sit proud of the mirror by about 1/8". At the bottom they sit on the 4" high backsplash ledge.
produced by the millworker. The stone overhang is 1.5" and protects it from water drips.
It is an 1.5" ogee built up edge.
The length of the vanity is 9'-4" long overall. The storage towers at each side are approx. 1'-4" wide.The vanity/sink portion of the base cabinet is 22 deep". It steps back slightly at each side where the drawers are to 19.5" deep. The towers
“Trim around bath tub” — Carrie Gough
BiglarKinyan Design Planning Inc.
6 Reviews
casual luxury
Ideabooks220K
Questions88
Is finish granite border 1 1/2 or 2"
Is finish granite 1 1/2 or 2"
The floor tile appears to be two types? Previous answer just said Kult white stone. Also there have been two answers given for the grout, 1/8 inch and 1/16 inch. Which is it? Thanks!
It is Giallo Ornamental granite. It was custom fabricated with a 1-1/2" flat polished edge profile.
variegated and range from light cream to light medium brown. The grout spacing is 1/16".
The grout colour has been selected to closely match the tiles. We specified these tiles to be installed with a 1/16" grout spacing to minimize the grout size.
They are from Olympia Tile and are 1"x2" tumbled Botticino marble on a subway pattern.
It is a 1x2 tumbled marble in the colour bottacino.
“colors - granite tile cabinet wall colors together” — hannahwarner
HND2 Associates
2 Reviews
292 Indigo Bay Circle
Ideabooks3,023
Questions10
1x8 gapped 1/4" with finished drywall behind the 1x8.
12"x12" & 1"x2" marble tile
paneling is 1 x 8 gapped 1/4".
paneling 1x8, and Mitte Gray Glazed Porcelain floor tile from Lowes
1x8 gap 1/4 in over finished drywall
Planked walls with 1/8" gap
3/16" to 1/4"...1x8 gapped 1/4"
“Tile from Lowes” — luckigyrl3
Smith & Vansant Architects PC
2 Reviews
Guest Bathroom
Ideabooks4,435
Questions6
Elliott tile white #G123-00, with a 1/2" x 6" glazed bar in Dill. Yes, the 1x1 squares are a matching Dill within the 3x6 basketweave.
The floor looks like Pratt & Larson's 2x4/1x1 basketweave MO-24BA. We have an
It is a weave of 3x6 white tiles with a 1x1 dill drop-in. Sorry I no longer have the brand information available.
The wainscot wall tile is a Dirk Elliott tile white #G123-00, with a 1/2" x 6" glazed bar in Dill. Yes, the 1x1 squares are a matching Dill within the 3x6 basketweave.
bath 2 tile and side wall cabinet for bath 1 toilet wall
“Mirror on side wall” — katiedanforth
ID by Gwen
13 Reviews
Mid Century Modern Master Bathroom
Ideabooks300K
Questions81
What thickness of glass did you use for the petition? Not length/width of piece but thichness. Ex. 1/4 in...
floor. I have 46 inch by 46 inch approx. What do I use for the border a bullnose or would the tile 12 by 24 need to be cut? I plan on using the mosaic 1.25 x 4 inch (12 inch by 12 inch sheets) inside the border. My concern with the border is it could be sharp if my contractor has to cut the tile for
Usually 2x2 tiles offer enough grout lines to prevent slipping in a shower. I recently completed a bathroom (see Madison Park - Seattle) where I used 1x1 hexagon shaped marble tile on the floor. Marble is so smooth that larger tile sizes are not recommended for floors. The hexagon tiles are just fine (and
“Show” — w1nn13
© 2014 Houzz Inc.
Houzz® The new way to design your home™