Ethan Tweedie Photography
Is your Carrara size on the shower walls 6x12 or 9x18 (or something else)? Thank you so much!
Did you use 6x18 tiles on your shower wall?
I can't find the answer to the tile size used in shower. Is it 6 x 12 or larger? My shower is not as large and wanted to compare for scale purposes
look to be 9x18" tiles; if they were 6x12" tiles, the shower would only be 5.5' tall! If they were 12x24" tiles, it'd be 11' tall. Since 9x18" tiles are
consider cutting more common 18x18" tiles down to the 9x18" size.
They look to be 9x18" tiles; if they were 6x12" tiles, the shower would only be
If they were 12x24" tiles, it'd be 11' tall. Since 9x18" tiles are a bit uncommon, consider cutting more common 18x18" tiles down to the 9x18" size.
Liz Schupanitz Designs
Lake Minnetonka Tailored White Kitchen
layout - ours runs 12ft on the range wall and trying to confine it to 13 ft of the fridge wall. Our island is positioned the same (50x83) and we're using
Thanks. It's approximately 15 1/2 ft. x 15 1/2 ft at the widest part and jogs in at the range end
It's approximately 15 1/2 ft. x 15 1/2 ft at the widest part and jogs in at the range end to a narrower measure
Thanks, Cory! The tile is Encore 3" x 6" in silver and here is a link to the manufacturer's
The kitchen is approximately 14 1/2 Ft. by 15 1/2 Ft.
Does this island have 3 or 4 legs?
Loudoun Area Custom Estate Builder & High End Renovations
Fredericksburg Custom Homes Ltd. is a design-build company serving Virginia since 1994. FCH specializes in luxury custom homes built on owner’s lots and high end remodeling.
A House With Zip!
Bought very nice Susani tapestry (4' x 4') in Istanbul and need advice on the appropriate way to hang it. Any ideas
looks custom built. What is the railing and newell made out of? Simple 2x4's? I'm trying to find someone local to build something similar and using
The balusters are 1/2" x 1/2" square steel pickets.
The railing is capped with 2" x 3" (or 2" x 4"; not sure what they finally went with) mesquite. Same with the newel
1/2" x 1/2" balusters with 2x3 or 2x4 rail and newel
Arch Studio, Inc.
It is approximately 4 ft. x 8 ft. counter top, and the base is 3 ft. deep with 12 inch overhang for seating.
is pre-finished from Lumber Liquidators called Virginia Mill Works 3/4" x 4-3/4" Golden Teak Acacia Handscraped. You can see it on-line. Hope that helps
We are putting in an island that is just under 8' x 4' with sloped ceilings that will be around 9' above island. Would you recommend
by Amerock 3 1/2" Highland Ridge Cup Pull Item#: AM55318-PN 5" Highland Ridge Knob Backplate
Island size is 4x8...but base is 3' with 12" overhang
2 large pendants. Restoration hardware 13 inch diam on 4x 8 island Hung 6 feet to bottom
A House With Zip!
The balusters are 1/2" x 1/2" square steel pickets. They support a 1 1/2" x 3/8" steel railing, which is capped with 2" x 3" or 4" mesquite (not sure
The steel railing is welded to 1/2" steel pickets.
The drawings have these steps detailed to be 4" thick; however, specifications can change
(although rarely) but an edge-banded veneer would likely be the most common. A 1/4" veneer is applied to the entire wall with the rectangular panels added on
The riser is 4", tread depth 10"...Only 2x 2 3/4" beam. Aux extrémités
Kristin Lam Interiors
Contemporary. clean, warm kitchen
off the floating bar cabinet and surrounds window is Vihara Irridescent 1 x 4 glass in Puka. Perfect for entertaining. The floors are Italian ceramic planks
Slab door cabinets typically use veneer, so they should be dimensionally stable. We like to add a 1/4" solid wood edge band
I typically use handles that are 1/2 the width of the cabinet.
12" deep of usable space or top to bottom on the drawer fronts? Thank you!Write
There are 6" cans and 4" halogen cans over the peninsula.
I typically use handles that are 1/2 the width of the cabinet. Sherwin Williams 7050 Useful Gray veneer glued
substrate because it is more stable and because it will not warp 36" wiide and 12" deep top of the handles on the lower doors is about 3" from the top of door
Tile, Sonoma Tile1 x 4 glass
Martinkovic Milford Architects
Bathroom - Bastasch Residence
8-1/8" x 20-7/8” x 14-3/8" and can be found at: ...
We used the Ladena under-mount sink by Kohler. Its dimensions are 8-1/8" x 20-7/8” x 14-3/8"
The tiles on the wall are actually 12x24. 24x24 on the floor and 2x2 mosaic for the shower floor area. Beautiful!!
exactly like a tile made by MSI International called "Metro Gris". It's a 12"x 24" porcelain tile and runs about $2/sq ft.
application. My counter is 64.5" long x 22" wide. I can update the width to up to 25". My current double oval sinks are 12.5" front to back and 18.25" side