19 no drill Home Design Photos

W. David Seidel, AIA - Architect
Powder Room
Ideabooks3,149
Questions4
cut in each tile. This can be done with a blade, rather than a drill.
This clever tile layout didn't need any drilling — every fixture hole is set over a grout joint. This tends to be the easiest
semicircle cut in each tile. This can be done with a blade, rather than a drill.
his clever tile layout didn't need any drilling — every fixture hole is set over a grout joint. This tends to be the easiest
This clever tile layout didn't need any drilling — every fixture hole is set over a grout joint. This tends to be the easiest approach for sink fixture
semicircle cut in each tile. This can be done with a blade, rather than a drill.
“Backsplash tile” — Julie Griffin
Kwik Kloset of Markham
8 Reviews
Bathroom Closet
Ideabooks17
Questions0
CNC Cutting and Drilling
“Awesome hamper!” — Katerina Smotrich
ID by Gwen
15 Reviews
Mid Century Modern Master Bathroom
Ideabooks310K
Questions83
As for drilling through framing members those joists are 4"x8" (old 2" stock and new 1 3/4" microlams LVL's) total and no holes are drilled within 2"
bar can also be mounted to the glass for towels, robes. All mount without drilling and the bar is rated at 250lbs.
2" of the top or bottom. As for why the electrian drill two holes? Not sure. I do know the work was inspected and past city hall. Thanks for the
“The color and simplicity.” — Sarah O'Neill
Schedule a FREE Design Consultation
(908) 322-8270
Email Us
New Jersey Closet Storage & organization design and installation
Since 1983, Closet Factory has defined the art of organization by designing and installing the only truly customized closet and storage solutions in the industry.
Sponsored
Contemporary Living Room
Ideabooks501
Questions3
are designed to hold a certain amount of water. However, they have holes drilled on the ends for drainage. We recently had a storm. Water came in from the
“Large windows off living room” — Sarah Summers
Garret Cord Werner Architects & Interior Designers
6 Reviews
Exterior
Ideabooks5,292
Questions5
These are not dryvit walls. They are drilled and glued into the stucco wall.
“stucco or brushed concrete” — haydonm
Key Residential
9 Reviews
Caruth Home - Fall 2012/Winter 2013
Ideabooks3,497
Questions4
in place using a shutter style sliding latch bolt that locks into a hole drilled in the floor plank. Hope this helps!
“Bath” — goldee77
Scott Haig, CKD
5 Reviews
Scott
Ideabooks8,216
Questions12
as they double as landing lights for the toilet... Holes were carefully drilled in the travertine to install them. These mini lights also surround the bathtub
“colour of the tiles” — nbalsara
Garret Cord Werner Architects & Interior Designers
6 Reviews
Bathroom
Ideabooks6,974
Questions14
float your mirror? Did you glue your mirror to a piece of plywood and then drill the plywood into the wall studs? I want to do the same with my master bath
“Counter/sinks/faucets” — daja35
© 2014 Houzz Inc. Houzz® The new way to design your home™