42 no drill hook Contemporary Exterior Design Photos

Calico Studio
Ames Lake Studio
Ideabooks3,056
Questions5
private drilled well is common. Using water from a nearby lake or stream is another option. Once you identify your water source, the next step is determining how it will get from the source to your home. A pump and filtration system will require energy to run. Holding tanks will be necessary to store
barrel hooked up to irrigation system.
“Yeah, this is great!” — kalaheo75
Meditch Murphey Architects
1 Review
Dutchess County Guest House
Ideabooks136
Questions1
person drill & install piping for a bubbling fountain
“Pedras” — Priscilla Araujo Araujo
Garret Cord Werner Architects & Interior Designers
5 Reviews
Exterior
Ideabooks4,508
Questions4
They are drilled and glued into the stucco wall.
“fence” — fwn2010
Jim Burton Architects
4 Reviews
Mercer Island Entry
Ideabooks2,912
Questions2
could we drill out a groove in the sidewalk, install electricity for the automatic timer, and then put pretty river stone over the channel to properly drain the gutter?
“Roof over front door” — reneerodda
Resolution: 4 Architecture
Berkshire House exterior
Ideabooks1,662
Questions4
are pre-drilled & screwed into 2x vertical furring strips w/rubber gaskets on building-wrapped exterior sheathing.
“Simple lines and materials” — kdanquahsmith
Rhodes Architecture + Light
10 Reviews
Magnolia Gardens
Ideabooks6,031
Questions2
design hook
“Similar” — dough08
Allen Associates
10 Reviews
Mesa Contemporary
Ideabooks320
Questions1
towel hook
“Wood” — ctomaso
Paul Farinato
deck railing
Ideabooks2,194
Questions3
hole drilled in the surrounding 2x2 loose frames into which the wire fits. The wire is 1/4" thick, so drill the holes 5/16". The wire grid is 4" o.c. so that is the spacing. As the wire is welded in such a way that the horizontal wires are on top of the vertical wires, that places the centerline of
hole drilled in the surrounding 2x2 loose frames into which the wire fits. The wire is 1/4" thick, so drill the holes 5/16". The wire grid is 4" o.c. so that is the spacing. As the wire is welded in such a way that the horizontal wires are on top of the vertical wires, that places the centerline of
“Wire in railing” — dstrozak
© 2014 Houzz Inc.
Houzz® The new way to design your home™