35,264 warmlyyours1 Contemporary Home Design Photos

Synthesis Inc.
9 Reviews
Condo Renovation
Ideabooks1,139
Questions4
We custom designed the railing and then had a local subcontractor fabricate it. The railing consists of 1 1/2" stainless steel tube as posts, 3/4" x 1 1/4" rectangular frame, and 3/4" round infill. Handrail was Maple.
We custom designed the railing and then had a local subcontractor fabricate it. The railing consists of 1 1/2" stainless steel tube as posts, 3/4" x 1 1/4" rectangular frame, and 3/4" round infill. Handrail was Maple.
Dream house 1 room on each floor
“Open staircase” — jacs1234
Drawing Dept
8 Reviews
Farmsworth Residence
Ideabooks31,212
Questions40
I have very dark grey 2 by 1 ft. tiles being installed on my kitchen floor. The cabinets will be white. The kitchen is around 400 sq. ft. Should I be using light or dark grout?
It's a Walker Zanger glass tile and I believe the color is 'platinum matte.' The tile size is approximately 1 1/2" x 6".
is approximately 7'-11". The cabinetry is semi-custom. The upper cabinets are about 40" (including a 2.5" light rail at the bottom). There is also a 1" closure strip above the cabinets.
Matte. The tile size is approximately 1 1/2" x 6".
The backsplash is a Walker Zanger glass tile: Platinum Matte. The tile size is approximately 1 1/2" x 6".
“Countertop” — rudolphdog
CG&S Design-Build
10 Reviews
A House With Zip!
Ideabooks18,831
Questions16
The balusters are 1/2" x 1/2" square steel pickets. They support a 1 1/2" x 3/8" steel railing, which is capped with 2" x 3" or 4" mesquite (not sure which dimension was ultimately used). Not sure
The steel railing is welded to 1/2" steel pickets.
is added right on top of drywall. I have seen this done with solid wood (although rarely) but an edge-banded veneer would likely be the most common. A 1/4" veneer is applied to the entire wall with the rectangular panels added on top. It is not difficult to do for a skilled carpenter. Talk to your interior
wood staircase The balusters are 1/2" x 1/2" square steel pickets. They support a 1 1/2" x 3/8" steel railing, which is capped with 2" x 3" or 4" mesquite
“S” — Lynn Chance
Precision Cabinets
2 Reviews
#55 - Millennium Enterprises - Menlo
Ideabooks5,024
Questions4
KITCHEN Material - Paint Grade / Cherry Finish - Swiss Coffee Paint / New World Doors - 1/2" Shaker Features - dishwasher appliance panel, base molding, trash pullout, farm house sing, paneled ends, pull out spice rack, spice tray MASTER BATH / BAR / LAUNDRY Material - Cherry Finish - New World Doors
interested in the below ET2 Contemporary Lighting Pendants: - Frost 1-Light RapidJack Pendant (E84444-10SN) - Carte 1-Light Pendant (E91051-39SN) - Rondelle 1-Light Pendant (E20021-01) - Cilandro 1-Light Pendant (E63009-11) - Minx 1-Light RapidJack (E94339-112SN)
“Bath” — Tony Jacobsen
Design Moe Kitchen & Bath / Heather Moe designer
9 Reviews
La Costa
Ideabooks16,653
Questions14
horizontal staggered pieces (like those in the photo) and also 1 x 1 mosaics. Good luck with your project!
#fishbis10, Thanks for your question. In regard to a border around the tile on the backsplash, we didn't use a border for 2 reasons: 1. On contemporary installations, we often prefer a "cleaner"
wall in the profile of the duct cover. You could do something similar by creating a raised drywall platform in the shape of the hood that is perhaps 1/8" larger than the hood all around. This is only going to work if you have a squarish hood and a skilled drywall installer, however. You may be better
doesn't use a border, 2. the installation method was glue-up, which means that the tile is glued directly to the wall (as opposed to being "floated" 3/4 to 1" out from the wall), and 3. no coordinating borders were available from Sonoma Tilemakers. (OK, I know that I said 2 reasons, but I discovered that I
“tile” — Julia Veksenfeld
NVS Remodeling & Design
12 Reviews
Gorgeous Kitchen Remodel
Ideabooks6,934
Questions17
The island is 66" long, and the top is 79 1/2” x 37 1/2”. Hope this helps and thank you for the question.
Hi Barbara, the granite is 1 1/4" thick.
Thanks for the question. The tops are White Spring granite with 1/2 bullnose edges.
Hello! It is White Spring with a 1/2 bull nose edge.
White Spring granite with 1/2 bullnose edges.”
this granite looks to have a 1/4" rounded top and squared
squared off bottom edge finish, I like this less than the 1/4" rounded top AND bottom
“Pearl tumbled travertine” — turner_1976
JL Interior Design, LLC
5 Reviews
Marina Home
Ideabooks15,483
Questions15
@treyampofo Thanks for your interest. It's Whitehaus WH1-103L. It is 17.5"W x 8"D x 5.5"H.
Excellent use of space for power room of 4'5"x2'8-1/2"wx7'7"H
for the delay! Thanks for your interest. It's Whitehaus WH1-103L. It is 17.5"W x 8"D x 5.5"H.
@ladyfayej the dimensions of the powder room are 4'5"L x 2'8-1/2"W x 7'7"H
We carry this model and many like it on our webstore for only $111 if you're interested! http://whitesplumbingsupplies.com/store/index.php/whitehaus-wh1-103l-isabella-small-wall-mount-basin-w-center-drain-white.html
tiny powder room, it can be done “@ladyfayej the dimensions of the powder room are 4'5"L (52") x 2'8-1/2"W (32-1/2") x 7'7"H” “Excellent use of space for power room of 4'5"x2'8-1/2"wx7'7"H” “Wow. Tiny sink. Closet converted to a half bath.” “Several narrow/slim/side sinks for a narrow powder
“Gold mirror” — patsdsu
Tim Cuppett Architects
11 Reviews
Renovation
Ideabooks12,184
Questions14
1" bead is a separate piece.
Is the baseboard just a piece of 1x8?
How is the 1" bead added to the casing? Is it a separate piece or is it routed out of the 1x6? Thanks!
The trim around the door is approximately 6 1/2" wide.
Trim Dimensions for 9'4" ceiling: 1x8 baseboard; 1x 6.5" trim around the door with 1" bead
“Trim” — roseannebailey
© 2014 Houzz Inc.
Houzz® The new way to design your home™