Houzz is the new way to design your home.
198 Cutting boards hand made using salvaged Dining Design Photos
delphi.com you can buy the cutting tool
It was made for me by Greenhammer. wwwgreenhammer.com
could we do this by the picture window in den? bench under window and use library table as an eating area?
I like the bottles made into lighting the area.
Lighting above dining table made of bottles
Yet another use for all those wine bottles.
awesome outdoor lighting using old glass bottles
three white ones at a discount store and the brown one at a garage sale. She painted the salvaged table’s base legs using a mix of all the green paints she found in her garage. And she made the bottle lights by cutting off the bottoms of beer and wine bottles she found on her property during reconstruction
look sensational doing it.Note the use of a built-in bench on one side of the dining table. It looks inviting and comfy and allows for more seating on that side than chairs would.
Smith & Vansant Architects PC
I would talk to your local salvage yards to see what they can come up with or find out who they know that deals with salvage timber frame barns. Good luck!
The ceiling height of this dining room is 9' - 0" and the end beams are 4x8's with 4x4's infilling. These are all reclaimed hand hewn barn beams so there is quite a bit of dimensional variety.
high simple base boards and rustic ceiling
Skirting boards ... Straight and different colour to the floor and the wall
Understated use of color on the walls
5. Use color to define the architecture. Different colors reinforce a sequence of spaces leading to the door.
Brandon Architects, Inc.
(semi gloss) and ceilings are the same OR where coffers are semigloss with the inner squares use flat paint. Which way is this dining room?
Could you please tell me what color paint you used on the walls?
Hi - can you tell me who made the lovely distressed finish display cabinet? Thank you. T. M.
Can you advise the name of the fabric used on the blinds and curtains. thank you
Gotta love the grain pattern & character in the French/Euro Cut Oak...
I made this succulent arrangement and used fake plants. No one can tell the difference, just be sure and buy high quality so the plants
the brand/name of the wallpaper used in this room?
Thank you for your comment. This console is custom made by Patterson Construction Corp.in
Your wood slat ceiling is beautiful. Can you share information about what wood it is made of and how it is attached/installed? How do you get such even spacing? Thanks in advance!
Urban Tree Salvage, based in Toronto, is Canada's leading salvaged live edge slab table manufacturer. We specialize in creating one of a kind tables in a variety of locally felled, salvaged hardwoods. Please visit our website for more information on our company www.urbantreesalvage.com or send me
treegreenteam.com we build 100% salvaged live edge tables~!
Ventwood ceiling feels very rich - keyed to walls. Dining room table - huge - feels hand made and personal
Wood slat ceiling. Could possibly be used over kitchen island.
Madison Modern Home
Chalkboard Table DIY Project
From my understanding, chalkboard pen doesn't erase well from chalkboard paint... would a repainting of the chalkboard paint be required after every use?
You don't need to repaint after every use. For the best results use a clean rag or paper towel with a squirt of chalkboard cleaner (http://www.neoplexonline.com/acrylic-spray-cleaner-chalk-bottle/) For a stubborn spot or residue "shadow," use a Mr. Clean Magic Eraser sponge.
A chalk board table would be super fun for entertaining.
LOVE, LOVE, LOVE the chalk board table
Subtle and contemporary use of the paint
Chalk board table for parties. You can get chalkboard paint an do this with any table.
I love the idea of a chalk board painted table
Chalkboard table - Use ECOS Paints for extra coverage and durability in addition
Tim Andersen Architect
Dining room restored
Seattle and want to copy this. What is the height of the wainscotting - it looks to be about 4.5 ft? Also, did you use the same piece of trim on top of the wainscotting as you used on top of the doors and windows? Finally, is that 1x2 which is vertically separating the 8" MDF sheets?
plates to rest. Apron below is 5/8" x 3 1/2" and battens are 3/8" x 1 1/2". They are applied 8" on-center over 1/2" MDF sheets; there's no reason to cut the MDF into 8" wide pieces. Base is 5/8" x 7 1/2" with shoe to cover edge of flooring.
I may have misread your question. Using burgundy tone with Atrium White should work fine.
fibers and resins compressed under pressure and heat into building products. Sheet materials are denser than plywood and very stabile, so they are often used for cabinets and paneling intended to be painted.
A. Rejeanne Interiors
A. Rejeanne Interiors Portfolio
where is the mirror from or was it made to order
I was trying to find the pewter grass cloth by Philip effervescent ht you used in this dining room but need more info in order to locate it.
the ceiling is a wall treatment that was hand made in italy. it's capis shells in 12x12 squares that were arranged in a diamond pattern. we originally had them all going in the same direction but
this ceiling is a series of square tiles, hand made of Capiz shells. it is technically a wall treatment that we applied to the ceiling to give this room a "wow" factor.
pre-pasted. They are not! easy to install You can damage the delicate shells edges. We cut the tiles with a giant paper cutter. It is best to place a soft clothe on the face of the tile with a 2 by 4 next to the cutting edge to prevent shell damage and chipping. Work it 2 feet by 2 feet sections, spread
Photo credit: Kimberley Bryan © 2013 Houzz
What paint sheen was used on the ceiling?
Gorgeous! I don't have the actual dimensions at hand - i will have to do some homework tonight. I appreciate your patience.
Sorry, no floor plans online but ironically - we switched from remodeling the mobile home to building so quickly - this home was built using the same basic layout but we extended the house 4' extra to the south for width - then connected it to an existing room! Our architect was Philip Lust
salvaged wood farmhouse table restoration hardware
Like the wide boards for flooring
to show how bead board would look