Houzz is the new way to design your home.
2,406 SV218D Entry Design Photos
Sargent Design Company
For the Love of Color
Walls: Pratt & Lambert 1704 Ceiling: Pratt & Lambert 1714 Trim: Benjamin Moore 218 SI Door: Benjamin Moore 2174-20 Floor: Wood Cabinet: Pratt & Lambert 1656 Counter: Pratt & Lambert 1656 Inside Cabinet and Bead-board back: Pratt & Lambert 1704
Eleven 950- Entry
the 3d finishing on the walls
3-D wall is awesome with light behind
3d backlit wall covering with a little color
Woven resin 3D surface from 3-Form
Woven resin. This woven 3-D surface wall treatment is from 3-Form. Available in many color options, it was once only seen in commercial projects but has become more popular in residences.
dSPACE Studio Ltd
Thank you for appreciating our work and for the lovely compliment! Best Wishes, dSPACE Studio
Shiny, Please e-mail us at firstname.lastname@example.org for further correspondence regarding your publication. Best, dSPACE Studio
Thank you for your interest in our project, and good luck with yours! dSPACE Studio's portfolio of work can been seen at www.dspacestudio.com
Flat, tapped and mudded for a nice crisp corner. Good Luck with your project. dSPACE Studio's portfolio of work can been seen at www.dspacestudio.com
mudded for a nice crisp corner. Good Luck with your project. dSPACE Studio's portfolio of work can been seen at www.dspacestudio.com
This is a custom rug from Rexx Rug in Chicago. Thanks for your question and good luck with your project. dSPACE Studio's portfolio of work can been seen at www.dspacestudio
Venegas and Company
Center Street Mudroom
W/D behind a cabinet...in the kitchen or addition?
Like the doors to the w/d sliding in...
If we don't move the w/d?
Combo w mudroom and connect to outside. Want shower, dog space too. May not need W/d. Can use for seasonal storage
Reassessed doors for w&d
Laundry Entry - Hidden W/D
Eric Fisher Residence
Advantages of 2D CAD:Cost effective; low initial investmentDrafting concepts are basic and easy to learnQuick means of generating 2D document setsIndustry-standard file conventions (.DWG, .DXF) ensure you’ll be able to collaborate and exchange data with other pros and consultantsDisadvantages of 2D CAD:Lack
CAD:Lack of 3D capabilities means other programs must fill those needsCross-coordination and set management (changes) take more time. Not the most efficient workflow. Particularly evidenced when making changes late in the construction document stage.The industry is moving away from 2D standards to BIMTedious
BIMTedious, repetitive drafting tasks (trimming, extending etc.) are baked into 2D drawing
A+B KASHA Designs
Boulevard Saint Germain
carrelage d'entrée d'immeuble
porte d'entrée double
porte d'entrée en bois
hall d'entrée immeuble
porte d'entrée immeuble
Crystal Kitchen Center
ASID Showcase House
Lovely space! Would you say that this is an 8 ft. ceiling in this room? I'd like to do the same ceiling in my kitchen but was wondering if 8 ft is too low?
Hood morning, Thank you for your inquiry on this project. The openings are approximately 16"w x 12" d x 12"h(the bottom cubby is 16"W x 12" d x 14"h). If you are designing this from scratch, we would suggest finding the basakets first and then design the cubby size around
I love the ceiling but I'd love to see this light in the space instead.
See at d ent smaller modified version of this main door entrance