33,543 wall panel Exterior Design Photos

Fivedot Design Build
4 Reviews
The Beatbox
Ideabooks2,618
Questions1
Love the exterior wall pannelling, what material is it?
The white large panels of the outer walls look amazingly fresh and modern. What material is it? Kan you use isolation underneath it and fix it on the isolation panels?
It is hardi panel. You could install it over rigid insulation with furring strips fastened though the insulation.
This is what ours might look like if you use this paneling on the outside
continuous wood from floor to wall to ceiling
cream colored hardie panels, large size- gives a warm glow.
This is what a white hardi panel would look like with reduced reveals
“terrace area with lounge” — ankur4878
Lucid Architecture
2 Reviews
Pigeon Creek Residence
Ideabooks5,307
Questions5
Hi, It's me again. How did you obtain this blue panel look? What material is that? Is there a system to work with those seams in the panels? Also, how did you achieve the satiny look with different shades of blue? Thank you.
Who makes these cement panels? What wood is
what is material on left wall?
blue-ish panels are? They are great. Thank you!
You might live Swisspearl panels. Check it out!
It is a corrugated steel panel. Some
Some of the companies that make panels like that are Centria, Firestone, and McElroy.
it's western red cedar and cembonit panels.
I like these metallic looking panels whatever they are--like using a combination of materials
steel panel against the cedar siding
Cement panels (blue), per Architect is "cembonit panels". another reader suggested: "S
“designated area by material” — clrmurray
Jim Burton Architects
4 Reviews
Mercer Island Entry
Ideabooks3,487
Questions3
What the panel on the wall?
Also noteworthy - If you use Hardie Panel with the open joint rainscreen (like this project), it voids the mfg warranty. It is still used this way though, on single family and multi family
European cement-board panel product called Cembonit.
interesting comment on panels & cost
Silbonit is ~$6.50/sf, which includes the stainless steel fasteners. Hardie panel sheet is about $1.10/sf here in Seattle. Silbonit is a high density product, Hardi is not.
“EXTERIOR color and size of panels” — Heidi Picard
A.GRUPPO Architects - Dallas
2 Reviews
Bley Sleeping House
Ideabooks1,185
Questions4
great red! Who makes those cement board panels?
beautiful, can these panels be used for bathroom walls, showers?
How to see these or similar Hardi panels in person?
like to see the application of Hardi Panels in person. Can you recommend neighborhoods or areas where we can see these types of exterior materials? Thanks!
transfers through the panels. It would definitely need to be sealed at at minimum. It' probably something I would try on my own place to test it out, but without that I would be concerned about recommending it to a client. The main concern being about water migration through the panels.
jrcdesign: It is cement-panel (smooth) with X-treme trim from Tamlyn.
Great find for me today! Thanks for sharing the info. I have emailed my James rep and asked if these commercial panels are available for purchase for a residential home.
“.” — thegitz
Mohler + Ghillino Architects
19 Reviews
View Residence
Ideabooks1,436
Questions3
lower shed roofs. Exterior materials include the existing stone veneer (painted), painted hardi-plank siding, clear finished marine grade plywood panels and a plate steel eyebrow between the two sding materials. photo: Alex Hayden
is treated both sides and all edges with Sikkens Cetol 1/23. The top edges are obviously flashed and the bottom edge is held about 3/4" above the panel below to ensure it is not in contact with water. I'd check the Sikkens website for application in cold climates but I see no reason why it would not
Both Hardi panels and siding again.
Solape Roof, paneles with Flatwork windows
“Paint color” — irfan22in
Stephenson Design Collective
4 Reviews
Elemental Design LLC
Ideabooks3,788
Questions5
Can you tell me the details in installing cement board in this fashion ? edge treatment where panels meet? What did you use under the cement board siding
How did you cut the Hardie panels?
Good use of panels and interesting mix of materials.
Large fiber cement panels and bricks
white walls are cement panels
Color it modern and bold. Available in large, smooth panels, fiber cement board is ideal for the exterior of a modern house. The rectangular grid created by the joints between panels gives the exterior structure and order. The ability to finish the material in any color enabled the architect of this
“Hardi Panels” — mcogdill
Coates Design Architects Seattle
23 Reviews
Ellis Residence - exterior
Ideabooks8,208
Questions3
What are those gray "metal" panels made of?
greenish walls look good with charcoal trim and wood accent walls
Standing metal panels could be a cool accent wall, inside my office.
AEP Span– Standing-Seam Metal panels (COLOR-CHAMPAGNE
AEP Span– Standing-Seam Metal panels (COLOR-CHAMPAGNE)
Metal roof panel used on wall
y. Outside CMU walls extend from the house like arms; in this case a seating nook is created near the entrance. Inside ...
become compartments at the edges of rooms. The roof appears to float above a projected metal-clad wall from an otherwise glassy pavilion. Similarly, a masonry wall extends and thickens to allow an inset wood bench marking the entrance.
“exterior cladding5” — nardiak
Resolution: 4 Architecture
Berkshire House exterior
Ideabooks1,897
Questions4
Outdoor Fireplace, Screen Porch o Environmentally Friendly Features: Geothermal Heating/Cooling System Materials: o Exterior: Cedar Siding, Cement Board Panels, Galvalume Metal Roof, Ipe Wood Decking o Interior: Bamboo Flooring, Caesar Stone Countertops, Slate Bathroom Floors, Cherry Cabinets, Aluminum Clad
not caulked - seam "gap" is per manufacturers recommendation (about 1/4"). the installation is a rain screen. cement board panels are pre-drilled & screwed into 2x vertical furring strips w/rubber gaskets on building-wrapped exterior sheathing.
cedar siding + cement board panels
I think the cement board panels in a light color (white, near white) could look good, grey, not so much, even
Fiber cement panels in this prefab house cover a small volume, while cedar siding is used for the larger bar. The slate-blue color is carried into the space between the windows on the second floor.
“Siding” — Billy Burt
© 2014 Houzz Inc.
Houzz® The new way to design your home™