137 eleganza 18 x 18 Family Room Design Photos

Huestis Tucker Architects, LLC
3 Reviews
Huestis Tucker Architects, LLC
Ideabooks27,714
Questions38
approx 18 'X 24'. What is the side wall heights and then up to the peak of the vaulted ceiling?
Is it 1x6 w/a v grove?
I looked at bead board this morning, 1x6 with a middle bead or we could flip the material and have a wider strip with a v. I can't decide. And your ceiling helps. Very lovely
about 18"x24" and it was from Home Goods. all the best, Jennifer www.huestistucker.com
about 18' x 24'. All the best, Jennifer www.huestistucker.com
approximately 18' x 24. All the best, Jennifer www.huestistucker.com
2'-8" x 5' high. All the best, Jennifer www.huestistucker.com
“Separate sitting area” — rhondaparker
Cecile Lozano Interiors
1 Review
Orinda Family Fun Room
Ideabooks23,734
Questions32
about 18"h x 18" dia. They were purchased at Room and Board but they no longer carry them. Hope that helps.
about 15-18" deep and the fire box was about 15" deep. I hope this helps answers your questions. Best, Cecile
Hearths are typically 18" or more - that's dictated by local building codes. The shelves appear to be no more than 12" deep.
about 12'x25'. It's one open space that includes both the living and dining areas.
“Rug” — kathsmith
Garrison Hullinger Interior Design Inc.
34 Reviews
Hilltop Delight
Ideabooks30,129
Questions17
have an 18X15 family room. The first 18' wall runs east to west with built in books shelves, fireplace and an interior doorway with 3 ft on the west end of the doorway where the tv hook up exists. The other 18' wall is an exterior east to west wall with a 6' wide window on the west end of the wall. The
South 18' wall positioned on the 12' of blank wall with a round table and lamp in the corner. Two large club chairs on the east wall centered under the 9' window with a table and lamp between them. A square cocktail ottoman or table would fill out the middle of this grouping. In the corner where the
and a 10 x 14 area rug.
“Love the colors” — mankind666
Loudon County Interior Designer
We create amazing residential and commercial interiors unique to the clientele that we represent. This means that each project is tailored to fit you and your family’s lifestyle.
Sponsored
Debra Campbell Design
Debra Campbell Design
Ideabooks5,681
Questions6
18" travertine.
Design 18" travertine
18" Travertine surround!
Travertine 18" around fireplace
simple 6x12 travertine around fp
“Traditional” — gathering
Murphy & Co. Design
4 Reviews
Mill Creek Ridge Farmhouse
Ideabooks5,542
Questions9
12'-7" x 14'-10"...Family Room 18' x 25'-0". Thank you.
room is 18x25...Size 18ft
“Open concept layout” — Suzie Harvey
William T Baker
1 Review
William T Baker Houses
Ideabooks1,428
Questions5
wood 3/4" x 5-1/2" with a 1/8" crack between each board. Be sure the painter does not caulk the crack.
wood 3/4" x 5-1/2" with a 1/8" crack between each board. Be sure the painter does not caulk the crack.
popular 1/8 apacing
“ship steering wheel” — karaandrews
Michael Abrams Limited
19 Reviews
Seeley Family Room
Ideabooks75,674
Questions85
cabinets with 18" toppers or 36 & 12? I appreciate any help!
this 12' x 18' includes the kitchen as well? what is the dimensions pls including the kitchen and the breakfast table as well i can see?
y 12' x 18'.
“The paint is BM shaker beige” — Cheryl Cox
Traditional Family Room
Ideabooks2,151
Questions4
Press X (times) 10. Press the memory recall button 11. Press = 12. Press the inverse button 13. Press the TAN 14. This is your miter angle. Write it down rounded to 1/10th of a degree (if it was 38.34567, you would write down 38.3). 15. Press clear 16. Input the W value 17. Press TAN 18. Press
it was 18.74587, you would write down 18.7). You now have your miter and bevel angles for your saw. This works just fine for vaulted ceilings and the whole process is very fast. It is not nearly as time-consuming as it appears here. With paint grade crown, you can measure your angle to ½ degree and
“Crown molding” — rbalcom
© 2014 Houzz Inc.
Houzz® The new way to design your home™