Houzz is the new way to design your home.
577 Edmonton Contractors Farmhouse Home Design Photos
Buckminster Green LLC
I would love to have the exposed beams like this. My kitchen is gutted. What type of contractor would do this
7: Get contractor estimatesIf you don't already have a licensed contractor on your project, your next step is to find one to carry the project through. I always recommend to my clients to get at least 3 different contractor estimates. I like to do preliminary walk-throughs with the contractors once the
since this is what will be considered in the final pricing from the contractor. You'll submit drawings for permits. These have a lead time, so check the timing with your local village. You'll need an architect, designer or licensed contractor signed up to finalize the paperwork and pick up your permits, so
sealing would be better explained from the contractor's mouth. Bob Stair (860) 824-7128
Thanks for your interest, it is painted wood and the railing was designed by us and built by the contractor.
We're from Kansas and wondering if there is a contractor that could do this near us? Thanks!
loads and the material used was Mahogany. Spray foam was used to insulate. Any more information regarding sealing would be better explained from the contractor's mouth. Bob Stair (860) 824-7128
I really do not like to give out rough estimates, as it will really depend on a lot. My advice would be to ask your local contractor.
Low Ceiling Kitchen
local trusted flat roof contractor that carries a large liability policy with fire insurance. This can be requested and should be provided as a standard if asked for by any client. You will see a difference in price between each application so again speak with your contractor and see what fits within
either EPDM, PVC, TPO or Torch On. The first 3 are single ply systems and installed with glues and heat welded seams. My preference as a flat roof contractor is Torch On. The system is at least 2 layers depending on spec it can be 3. In your case though 2ply torch would be the best system to install. The
Tommy Chambers Interiors, Inc.
French. Fine antiques and furnishings play well in the foreground of their extensive rotating art collection. Interior Design by Tommy Chambers Contractor Josh Shields of Shields Construction.
Hello. Thanks for the nice comment. That hood was a custom built hood by the contractor on site. It was plastered over and painted. Inside are the hood ventilation components and the wood frame.
Hello. Yes, the cabinet were custom painted and "antiqued" onsite by the contractor.
the inside and half on the exterior. The screens were able to be attached to the columns. Depending on the quality of your existing columns, your contractor may or may not be able to do this. The existing column has to be strong enough to support the screens.
They were custom built by the contractor
The contractor was Structure Works out of Dover Plains, New York. Their mason does do some selection during the building process. The stone is not particulary
Thanks for your interest! The contractor and the contractor's mason put that together. It was just a rustic beam that they secured to the stone. I'm sure if you show the picture to your local contractor they can duplicate it for you.
Albertsson Hansen Architecture, Ltd
The house and barn were built in quick succession, but were designed to look like the property had evolved over time. (The contractor was Leafblad Construction.) The barn was completed first, to provide a staging area for construction of the main house and a secure tool-storage
The house and barn were built in quick succession, but were designed to look like the property had evolved over time. (The contractor was Leafblad Construction.) The barn was completed first, to provide a staging area for construction of the main house and a secure tool-storage place. When it’s sunny