Houzz is the new way to design your home.
5,281 semi custom Hall Design Photos
New Leaf Builders
Hi, these are Feiss semi-flushmounts from the Lucia collection. Here's
This is a custom barn door is reclaimed chestnut, there is no stain. Wood from Manomin Resawn Timbers (http://www.mrtimbers.com/) REFINED
Feiss semi-flushmounts from the Lucia collection. Here's a direct link to the complete collection on our website: feiss.com
Feiss semi-flushmounts from the Lucia collection. Here's a direct link to the complete collection on our website: http://www.feiss.com/fa1505-pg1/Lucia.htm Feiss semi-flushmounts from Lucia collection
Feiss semi-flushmounts from the Lucia collection. Here's a direct link to the complete collection on our website: http://www.feiss.com/fa1505-pg1/Lucia.htm door made from chestnut http://www.mrtimbers.com
dSPACE Studio Ltd
with a custom stain blend of chocolate and ebony. The
satin vs. semi-gloss; thanks so much!
There are two coats of an custom stain blend that is 50% ebony with 50% chocolate applied to a quarter sawn white oak hardwood floors. The final finish has a polyurethane coat for a long lasting and durable floor. Good luck with your project. dSPACE Studio's portfolio
Milkshake semi-gloss, but in another post you have answer Hazy Skies ceiling flat and hazy Skies the trim! Is the ceiling the same color of the trim? Thanks you so much for your great taste.
Hi, great question. All the trim, baseboards, crown and millwork on this project are custom designed by dSPACE
with a custom blend dark stain. There is no brand or manufacturer as this is real wood, however the stain used is a custom blend that is 50% ebony with 50% chocolate applied to the floors in two coats. The final finish has a polyurethane coat for a long lasting and durable floor. Good luck with your
Seattle Custom Home Builder & Remodeler
Best of Houzz 2013
Best of Houzz 2013
Ventana Construction is a full-service professional remodeler and custom home builder. We build custom homes from the ground up as well as large-scale remodels and additions.
Kemp Hall Studio
satin vs. semi-gloss, but definitely going with the satin now! Thanks again! ;)
It is satin. We rarely use any semi-gloss (if ever)! We often use just a tongue oil finish which also achieves a beautiful and natural result.
was a custom mix and it took a lot of trial and error. Just start playing with it and add sparingly. Make sure you write down each step !!
had a custom knife made to duplicate these baseboards for our new house. Cant thank you enough!
was a custom mix but the base was Minwax special walnut. We added a variety of stains to achieve a bit more of the warm grey look you see in the photo. some ebony (warns if too much ebony=green) satin and tong oil
Terri Symington, ASID
Private Family Ranch Retreat
walls or semi gloss, as traditionally used for these items?
s can customize the size of the blade and the angle to some degree. Some manufacturers customize at no extra cost, so you can get the look you want at very affordable pricing. I'd verify warranty coverage, since many custom doors come without a warranty. Ideally the door will have a limited lifetime
doors were custom ordered. You can do an internet search for custom door fabricators and you will find many sizes and options available when ordering.
through custom door fabricators. For a true custom door you can specify how the angle and size of the louvers.
can be customized at our standard pricing. The other door looks mighty similar to our V1 door, but again can not be certain from the photos. I've attached a couple similar photos used at a 4 star resort hotel and a painted red V1 Door. TERRI - BEAUTIFULLY DESIGNED HOME - KUDOS!!
Grace Dumalac Design
done in a semi-gloss, Benjamin Moore color. If I recall correctly, it is Monroe Bisque.
where are these door from? Are the custom? What size are they?
mirrors and semi circle at top
com had custom framing
product is a semi-permanent top coating that needs to be maintained, like old fashioned floor wax, at least according to a distributor I spoke to about it. He told me that the satin soap layer had to be completely removed before any light spot repairs could be done. I am not a floor professional so double
decorative semi flush with 3" recessed in between beams.
John Kraemer & Sons
Hall & Sitting Area
share the custom stain used on the hardwoods? Thanks!
with a custom blend. Good luck!
Hello. As I said above, it is a White Oak floor with a custom blend of stains. Our clients saw a color that they liked, and our painters matched it by making a custom blend. This process is pretty typical in most homes that we build and remodel. Thanks for asking, and
assuming semi-gloss for the trim? I also LOVE the flooring and want to duplicate it for refinishing our white oak floors. However, we have red oak railings and treads (with iron banisters) and our contractor has pretty much left us hanging on how to get it all done and blended well. So much so, that
take to a custom color store and figure out the stain myself. I thought that was the man's job and to do it on our actual wood floors not sample strips of wood, right? Are you able to give me any idea of the brand and stain colors (percentages) that were used to produce this stain? So far, I've sampled