235 warmlyyours1 Gym Design Photos

Jon Eric Christner ARCHITECT INC.
3 Reviews
Strand 1
Ideabooks227
Questions1
Strand 1
“Baño” — vilmavilla16
Rill Architects
11 Reviews
Country Retreat
Ideabooks652
Questions1
James Ray Spahn
“Framed mirror for exercise room” — hrylance
CS Hardware
2 Reviews
InvisiDoor Hidden Door Bookcase
Ideabooks1,222
Questions0
start at $1,249, or you can buy just the hinge hardware and construction drawings for $150 if you want to build a bookcase yourself with the wood of your choice.
into a standard doorway. They come unfinished so users can paint or stain them to match the surrounding cabinetry. The fully assembled units start at $1,249, or you can buy just the hinge hardware and construction drawings for $150 if you want to build a bookcase yourself with the wood of your choice.
into a standard doorway. They come unfinished so users can paint or stain them to match the surrounding cabinetry. The fully assembled units start at $1,249, or you can buy just the hinge hardware and construction drawings for $150 if you want to build a bookcase yourself with the wood of your choice.
“hidden” — daseib
david phillips
4 Reviews
newton residence 2 - dpdk.59
Ideabooks224
Questions3
indoor, half court, was built with 2X6 wall studs, filled with F.G. insulation, and 1/2" MDO plywood glued and screwed the all the wall studs. The interior finish is 1/2" AZEK panels, beveled edge at 1/4" and space 1/4" apart from the adjoining panel. The AZEK was primed, then painted with two coats
.The AZEK panels were secured to 1/2" plywood using marine grade glue with S/S finish nails. All holes were filled / AZEK primed with two coats latex paint. All in all - a study wall, allowing for a good bounce off the wall.
the smooth side of the MDO plywood with marine glue and s/s small head nails. The ceiling also with FG insulation and MDO plywood is finished with a 1X8 tongue and groove board with a white wash finish, prior the two coats of urethane. The use of full coverage for the MDO plywood, reduced the issue
“AZEK panels” — vickychenlin
david phillips
4 Reviews
newton residence 2 - dpdk.58
Ideabooks444
Questions3
indoor, half court, was built with 2X6 wall studs, filled with F.G. insulation, and 1/2" MDO plywood glued and screwed the all the wall studs. The interior finish is 1/2" AZEK panels, with 1/4" beveled edges and space 1/4" apart from the adjoining panel. The AZEK was applied to the smooth side of the
the MDO plywood with marine glue and s/s small head nails. The ceiling also with FG insulation and MDO plywood is finished with a 1X8 tongue and groove board with a white wash finish, prior the two coats of urethane. The use of full coverage for the MDO plywood, reduced the issue of nailing panels or
“AZEK wall panels” — kw4kds
Lowe's Home Improvement
Indoor Spaces
Ideabooks2,292
Questions2
option 1
“gym” — __horans_lovee__
Traditional Home Gym
Ideabooks3,054
Questions3
Like 1 PRO Isawall Systems LLC Just noticed the phone number is incorrect. My deepest apologies!! It's 440-591-7854. Hope to hear from you! Thanks. Fred on Tuesday at 9:31am Like
Isawall Systems LLC The bar is made for the wall. The photo shows 2 panels. Each panel is 4'x8'. t is 2 1/4" from
Isawall Systems LLC The bar is made for the wall. The photo shows 2 panels. Each panel is 4'x8'. t is 2 1/4" from the wall be it drywall or masonry to the face of each panel Each panel has three stainless steel straps that are milled into the face of the plywood
would like to call me to discuss this new product and its versatility. 440.581.7854 Thank You for your interest. Fred April 9, 2014 at 11:08am Like 1 PRO Isawall Systems LLC Just noticed the phone number is incorrect. My deepest apologies!! It's 440-591-7854. Hope to hear from you! Thanks. Fred on Tuesday
“Gym” — adupla12
david phillips
4 Reviews
newton residence 2 - dpdk.61
Ideabooks216
Questions5
spruce, braced per code. We then glued and screwed 1/2" mdo plywood to the studs, after the iceyene insulation. Once the wall were complete we used 4 foot by 8 foot sheets of 1/2" AZEK. Each of the AZEK panel edges were cut at a 45 degree angle, and space 1/4" apart from each other. The AZEK was adhere
a 45 degree bevel edge cut along the outside edge, and installed with a 1/4" space between each AZEK panel, the selection to use of the MDO provided both the smooth base, which offered a flat surface, and would allow the exposed 1/4" space between the panels to be smooth. If CDX plywood was used, the
Attempting to secure the panels directly to the studs or to gypsum blue board, would not provide a proper backing behind the panels. The panels are 1/2" thick, and have flex which lead to the decision to utilize a smooth MDO plywood, which would cover the large wall areas, and provide the base for the
“adjustable rim with minimal overhang. Use for full court ends” — vickychenlin
Renovating in Ashburn? Contact a local pro
Virginia Custom Design
Northern Virginia Premier Interior Designer and Decorator
View my projects
Land & Water Design
Northern VA Landscape Architect & Designer
Best of Houzz 2013 & 2014
View my projects
© 2014 Houzz Inc.
Houzz® The new way to design your home™