Design your home
2,160 warmlyyours1 Home Office Design Photos
transFORM | The Art of Custom Storage
Painted Maple Corner Office
there's a door on one side and a 4x5 window on the opposite side,i get only 1 full wall of 10ftx10ft & a wardrobe niche,pls guide
I live in the Denver, CO area. My wife will be on a girls' vacation May 1st - May 6th and I would like to have a nice home/office built in our tech port
beautiful office which was build by transFORM is painted wood, so is the 1 1/2" thick counter top. Call us for more questions 914-500-1000
interest. The approximate dimensions of the room depicted are 6 ft wide by 6 1/2 ft deep. The height of the desk up to the desk top is approximately 30in
1. Manhattan corner office. Any nook or corner space can become a great home
chadbourne + doss architects
Hi. The baseboards are 1x3. Thanks for your interest.
Clean extension of door jamb to 1/8 proud of basebord. Baseboard likely 1/2" instead of 3/4
The baseboards are 1x3. Thanks for your interest.
1x3. Like the floors....1x3 baseboards...1x3 base...1x3 baseboard, 1x6 cased openings...1X3 baseboard
Poor House Interior Design
Studio and Office
Where did you manage to find black 1-1/2" nuts? I've been hunting for those same style but in 1 inch. Can't seem to find them anywhere.
Did you use 1.5 inch bolts (top and bottom) to support the timber? This is very cool. Thank
1 1/2" threaded rod for the vertical metal pieces....some type of flange @ the
We used 1 1/2" threaded rod for the vertical metal pieces.
Kevin Browne Architecture
The ceiling is rough-sawn pine shiplap, 1x8. Thanks for your inquiry.
Knotty pine, 1x8. For screened porch?
rough-sawn pine shiplap, 1x8 NOPE...Ultimate office 1
Mabbott Seidel Architecture
Harlem Residence Office
designed a 1 1/2" base of plywood and installed the flooring on top. The front edge is made from a floor piece turned on it's edge. It's about 2 1/4" thick
The wood top is supported by two layers of 3/4" thick (1 1/2" total) of plywood. The corner is just alternating layers of plywood glued and screwed together
that we've since used for heavier books. Ideally you would install a layer of 1/2" plywood behind the sheetrock wall finish, but we've also just used the "toggler"
Studio D Interiors
Home Office & 2 Bathroom Renovations
"handicapped" in the search box. Universal Design 1.) ... 2.) ... specializes in Universal Design Handicap Access 1.) The Americans with Disabilities Act (ADA)
information. Please take from this whatever is helpful. Best wishes. Houzz 1.) Go to Houzz Ideabooks and enter "Universal Design" in the search box. 2.)
handrails, everything. ... ... 2.) ADA Ramps: ADA Code 4.8 Aging-in-Place 1.) Consult with a Certified Aging-in-Place Specialist. You can find one through
Foley Fiore Architecture
Cutchogue Waterfront Residence
is there a like a 1/8" gap between what looks like the 1x4 and the 1x2 and are those boards flush or does the 1x2 set back from the 1x4. Love the look
Hi 2020House, The custom bookcases have a 2" frame, then a 1/2" reveal, and 6" wide verticals between each bookcase. With the exception
The chair is 22 1/2" wide by 24" deep by 40" high. That particular style is no longer available. I beliver it ran around
2013 at 1:09PM PRO debbienolan Yes , I also wanted to know the make of the chair and dimensions if you have them ? Price ? 0 Likes August 1, 2013 at
Chaddock, a to the trade only vendor. Would you like me to get you a price? 1 Like January 20, 2013 at 9:51AM Aida Mart yes please and website and phone
price. 0 Likes August 2, 2013 at 8:11PM PRO Tina Barclay The chair is 22 1/2" wide by 24" deep by 40" high. That particular style is no longer available