167 no drilling required Kids Design Photos

Linda Brettler Architect
Endo Renovation
Ideabooks2,042
Questions0
wall and require little more than 5cm x 10cm timber and plywood panels. After framing, the climbing wall is attached to the wall with self-drilling deck screws
a wall and require little more than 2-by-4s and plywood panels. After framing, the climbing wall is attached to the wall with self-drilling deck screws
wall and require little more than 5cm x 10cm timber and plywood panels. After framing, the climbing wall is attached to the wall with self-drilling deck screws
“Nice” — tammylove30
Kimberly Fox Designs
1 Review
Homearama 2013
Ideabooks2,000
Questions6
retired the board by suspending the board with plumbing fixtures after drilling holes and dropping pendants through the holes.
However, we made the light from the teen's actual snowboard he used. We drilled holes in the snowboard and strung Edison lights through the snowboard. It
“Snowboard light fixture” — aruss01
Courtney Blanton Interiors
10 Reviews
Hollywood Regency Teenager's Bedroom
Ideabooks35,086
Questions34
We carefully drilled a hole through the mirror.
I painted high gloss black. I took the mirror to my mirror supplier who drilled a hole through the mirror so I could mount the ram's head on the wall after
“Wall decoration” — jmoser1975
10% Off Projects Over $1,500
(703) 440-1200
Email Us
Leading Loudon Art Studio
Best of Houzz 2015
Studio Artistica creates fine paintings, decorative artistry, custom mirrors and sophisticated architectural coatings for residential, hospitality and commercial environments.
Sponsored
Ben Dial/ Stedman House Richmond, VA.
Bon Voyage
Ideabooks33,359
Questions13
for the wall panels, it looks like simple framing that will require small studs to be drilled or nailed to the wall. Use bead board paneling with the angle
“Drawers under the bed” — SC18
Paradise Restored Landscaping & Exterior Design
35 Reviews
Portland Landscaping Outdoor Living
Ideabooks23,493
Questions7
We actually use rebar to install the 4x4 surround. Drill through the wood then nail rebar down though it until it is below the wood
“it looks fun” — blitzyboo
Spazio Rosso
6 Reviews
Room to Dream Foundation 2013
Ideabooks993
Questions4
a bit of a tough question to answer: the butterflies were individually drilled and fastened to the walls with small brads. Having learned from doing it
“The wall art” — lessworld_moremusic
Frahm Interiors - Burlington ON
5 Reviews
Oriole
Ideabooks2,386
Questions2
R these lights electric & u had holes drilled by electrician to plug
“Desk Space” — jabacalas
Promenade Design + Build
6 Reviews
East 14th Street Coop Combo
Ideabooks452
Questions3
rack at CB2, hardware included. Directions: find a wall stud, use a power drill to install the hardware and rack.
“Baranda” — marceruizo
© 2015 Houzz Inc. Houzz® The new way to design your home™