5,422 Design Connection Laundry Room Design Photos

Search Tips:
  • To search for all words in exact order, you can use quotes around the term.
    Example: "Design Connection"
  • To search for all words in any order, add "+" before each word.
    Example: +Design +Connection
Claudio Ortiz Design Group, Inc.
1 Review
Laundry Room
Ideabooks38,139
Questions17
How are the connections made to the washer and dryer? Since those connections are in the back, it would seem very difficult to attach the washer hoses and the dryer vent. I like the built-in look/functionality, but wonder about
Most front loading washer and dryers have the connections in the back and can be pulled out from the wall. So in this case the plumbing pipes/connections and dryer vent would be attached and then the units moved back into place. Also remember, there
there is usually 4"-6" or so off of the back wall under the countertop that you don't see for room for the connections. The units aren't all the way up against the back wall.
put the water pipe turn off/on valves/connectors to the side of the washer or if possible, under the laundry room or bathroom sink. Then you can connect/disconnect hoses without pulling washer out. Also take less depth. For dryer, same comment as other, if you can vent drier to the left, most driers
“Cabinets” — pjbisesi
Josephine Design LLC
Josephine Design
Ideabooks25,047
Questions15
How would you get to the dryer vent and washer water connections if you had to?
I like this design for my small space. What is on top of the washer and dryer
I would like to know where is the washer and dryer connection in this laundry room? Where is it concealed? Thanks.
A portion of the countertop lifts off to expose piping, vent duct, etc. and there is enough room to access/disconnect the water supply and hose connections.
and scratches on the once-pristine finish of your washer and dryer. If new appliances are not in the cards, consider painting yours with a product designed for the task, like the Appliance Enamel paint from Rust-Oleum. You can also use appliance paint on worn-out finishes in the kitchen, from the fridge
“Laundry” — kravkova
Clean Design
23 Reviews
Custom Work
Ideabooks80,709
Questions16
How do you connect the washer/dryer and turn the water on/off?
My question is how to get to those connections. Conventionally you have the machines pulled slightly away from the wall, make your connections, plug them in, turn on the water and slide the machines in place. But with a counter in the way.
I love this use of stainless steel tile. Beautiful design! http://www
“Hanging rod between cabinets” — kathryndalia
Rock Paper Hammer
17 Reviews
Laundry Room
Ideabooks79,591
Questions43
How do you access washer/dryer connections if they need repair?
I'm wondering what the dimensions of this room are ? I love the design and decor.
who designed the cat? it looks so real
What is the width of each cubby? We're doing something a similar design but not sure whether our space is big enough for five. Thanks!
It looks like someone already asked but the answer has been deleted. Love the design....we need to redo our laundry room but I haven't figured the space out as yet. We have approximately 8'9"x11'10" to work in.
The connections are located on the wall to the right side of the dryer.
Oh - they looked like those bungee cords! Thanks for answering so quickly - I love your design - how nice to have a view while doing laundry!
“Hooks for coats” — Tina Harris
Castle Building & Remodeling
7 Reviews
Contemporary House Remodel and Addition
Ideabooks12,120
Questions15
This home was designed by Castle Building and Remodeling's Interior Designer Katie Jaydan.
60" AFF. This is the location of the access panel located in the side wall of the closet behind the laundry closet. So to access the water and gas connections, and most of the back side of the units one must unscrew the access panel inside the closet behind the laundry closet. We would be happy to give
much like a conventional range in a kitchen. The dryer vent would be hooked up after the dryer is in place, through the access panel. All of the connections could probably be made after the appliances are pushed into position but we recommend that you do it before hand for ease. Hopefully that helps
“Stack & hide” — Melyssa May
College City Design Build
5 Reviews
Marston Lower Level
Ideabooks29,053
Questions11
Where are the water valve connections and how does wash/dry. come out?
Water connections are behind the washer and the washer just slides out...hope this helps!
College City Design Build
“Mud/laundry room” — drlheinrichs
transFORM | The Art of Custom Storage
34 Reviews
The Ultimate Laundry Room
Ideabooks54,508
Questions15
This custom-designed laundry room provides a perfect place to do the wash. The combination of deep cabinetry, a floating unit with flip up doors and shelving, chrome slide-out baskets, a fold out ironing board hidden in a drawer, a handy chrome valet rod for hanging or drip drying and frosted glass door
Our washer outlet box sits above the washer on the wall, with all of its tubing, and our dryer vent connection adds almost 1' and that is using the absolute shortest amount possible. I'm in NJ, are our codes different - or can I transform my laundry room
you for your interest, I'm glad you like it. transFORM designed, manufactured and installed all of the custom cabinetry around the washer and dryer. transFORM often encounters design challenges like this one. That is the advantage of custom designed work. We can come up with a fun and innovative way for
“storage solutions” — awsmithh
MainStreet Design Build
21 Reviews
Birmingham mud/laundry room, MI
Ideabooks66,055
Questions34
The unique design challenge in this early 20th century Georgian Colonial was the complete disconnect of the kitchen to the rest of the home. In order to enter the kitchen, you were required to walk through a formal space. The homeowners wanted to connect the kitchen and garage through an informal area
which resulted in building an addition off the rear of the garage. This new space integrated a laundry room, mudroom and informal entry into the re-designed kitchen. Additionally, 25” was taken out of the oversized formal dining room and added to the kitchen. This gave the extra room necessary to make
Hi there, Thank you for your inquiry! The height from the bench to the rail above is 4' 1 13/16". I would speak with your designer about the heights recommended for your household as each use is different. Best of luck! Christine Ramaekers, CKD MainStreet Design Build
“entryway” — tetihouse
© 2014 Houzz Inc.
Houzz® The new way to design your home™