36 Standard Eased Edge Laundry Room Design Photos

Spinnaker Development
14 Reviews
1512 Dolphin Terrace (night shots)
Ideabooks36,913
Questions15
They appear to be standard counter height of approx 34"?
This is a slab material called London Fog and the edge detail is a 2 1/2" eased edge
just began, and I'd have second thoughts except resale is not a concern. Ease of life after age 60 and not entering and crossing the entire home wet from
What is the countertop and edge used?
“colors” — megblack1
Jackson Cabinetry LLC
7 Reviews
Laundry Room
Ideabooks12,038
Questions11
over the washer and dryer. What height is the base cabinets beside them. Standard base cabinets are not tall enough?
for the length - 25" is a standard depth.
The countertop is Caprize Capri Limestone with a standard square/eased edge.
build up the base to make standard height ones taller.
Although those appear to be standard 34 1/2" bases with "standard" under counter washer and
These are actually the standard height 34 1/2" H - though we did do these custom and they could be any
Dura Supreme and some other "factory custom" manufacturers offer 40 1/2" standard base cabinets. There are also "no charge cutdowns" offered from cabinet
“Colors, valance,trim around window” — rubicondreamer
Spinnaker Development
14 Reviews
1512 Dolphin Terrace
Ideabooks95,170
Questions51
Is the washer /dryer counter height, or is the counter higher than the standard height to accommodate the washer/dryer?
Thank you! The edge detail is a 2 1/4" mitered eased edge.
be purchased from Venetian Stoneworks in Irvine. This is a 2 1/4" square edge detail. Hope this helps!
late response, I must have missed this one. These are slightly higher than standard cabinet height by roughly 2" to accommodate the stone top. Most W/D's are
“Grey counter top” — krasnia
Loudoun County Premier Home Builder
Best of Houzz 2014
We have earned a reputation for exquisite design, attention to detail & superior results. Our customers are confident that they have received the best level of service in a courteous professional way.
Sponsored
Castle Building & Remodeling
8 Reviews
Contemporary House Remodel and Addition
Ideabooks13,142
Questions15
are pushed into position but we recommend that you do it before hand for ease. Hopefully that helps! Good luck and share pictures of your project when
low enough to see and retrieve all pieces easily. this is fit inside a standard height door opening in the closet, the height of the opening is around
Like that the washing/dryer tucked away - need Anudda cupboard for dirty easing, ironing board n cleaning stuff
“Deep enough to put stuff in doot” — lmarcotte02
Linda Seeger Interior Design
SUPERSTITION MOUNTAIN TRADITIONAL
Ideabooks1,862
Questions8
The sink is an American Standard sink. It is #9062.008 Country Kitchen Sink.
Curved counter edge for washer dryer bump out
laundry room sink. Am Standard...countertop edge...Sink covers edges.
“la++++” — cindyhennessy1
Beth Rhoades-C&R Remodeling
1 Review
18th Place S
Ideabooks7,356
Questions8
and I was worried about the lighting with my dark cabinets. Your work has eased my mind - thank you.
It is a Frigidaire, standard front load size.
“la” — cindyhennessy1
MainStreet Design Build
27 Reviews
Birmingham mud/laundry room, MI
Ideabooks84,189
Questions47
Are the cabinets standard height in the laundry or raised to accommodate the washer/dryer? I like
Quartz Countertop w/ 4" Backsplash & Sidesplashes [Delta Sand - G70] w/ Standard Edge Detail. I hope this helps. Regards, Christine Ramaekers, CKD MainStreet
variation directly out of the box. According to my supplier, that variation is standard with this stone. I recommend going directly to the Olympia website:
Thank you for your inquiry! The cabinetry is standard height, as the washer and dryer are true undercounter 24" units. Christine
“Utility organisation” — sianalexandra13
HARDROCK CONSTRUCTION
Laundry room with a view
Ideabooks59,421
Questions18
an inch all around the machines. The counter is 3/4" thick and the front edge is 1/1/2" thick to match the adjacent laminate flatwork counter. Hope this
an inch all around the machines. The counter is 3/4" thick and the front edge is 1/1/2" thick to match the adjacent laminate flatwork counter. Hope this
Ii think these are just standard white painted wood shelves--or could be laminate shelving--with white brackets
“Laundry shelves” — nevenadragan
© 2014 Houzz Inc. Houzz® The new way to design your home™